Registrador de datos HOBO de Titanio para Temp/Nivel del Agua (0 - 4m)

Características destacadas

Protección contra rayos: no hay cables de señal largos y los componentes electrónicos están protegidos en una carcasa de titanio para su uso en agua salada.
El software HOBOware Pro proporciona una fácil conversión a una lectura precisa del nivel de agua, totalmente compensada por la temperatura de la presión barométrica y la densidad del agua.
Con el muestreo de velocidad múltiple se pueden realizar tomas de muestras más rápidas en momentos críticos, como cuando se inicia o se detiene el bombeo.
Disponible en 4 gamas de profundidad
Ideal para su uso en pozos, arroyos, lagos, humedales y zonas de mareas.
Diseño sin tubo de ventilación para un despliegue fácil y fiable
Disponible en versiones de acero inoxidable y titanio
Sensor de presión de cerámica robusto
Incluye certificado de calibración NIST de 3 puntos.

El registrador de datos U20-001-04-Ti soporta las siguientes mediciones: Presión absoluta, presión barométrica, temperatura y nivel de agua

Pressure and Water Level Measurements****U20-001-04 and U20-001-04-Ti

Operation Range | 0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range | 69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F)
Burst Pressure | 310 kPa (45 psia) or 18 m (60 ft) depth
Water Level Accuracy* | Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
Raw Pressure Accuracy** | ±0.3% FS, 0.43 kPa (0.063 psi) maximum error
Resolution | <0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water
Pressure Response Time (90%)*** | <1 second; measurement accuracy also depends on temperature response time
Temperature Measurements (All Models)
Operation Range | -20° to 50°C (-4° to 122°F)
Accuracy | ±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F), see Plot A in manual
Resolution | 0.10°C at 25°C (0.18°F at 77°F), see Plot A in manual
Response Time (90%) | 5 minutes in water (typical)
Stability (Drift) | 0.1°C (0.18°F) per year
Logger
Real-time Clock | ± 1 minute per month 0° to 50°C (32° to 122°F)
Battery | 2/3 AA, 3.6 Volt lithium, factory-replaceable
Battery Life (Typical Use) | 5 years with 1 minute or greater logging interval
Memory (Non-volatile) | 64K bytes memory (approx. 21,700 pressure and temperature samples)
Weight | Stainless steel models: approximately 210 g (7.4 oz)
Titanium models: approximately 140 g (4.8 oz)
Dimensions | 2.46 cm (0.97 inches) diameter, 15 cm (5.9 inches) length; mounting hole 6.3 mm (0.25 inches) diameter
Wetted Materials | Titanium, Viton® o-rings, acetyl cap, ceramic sensor
Logging Interval | Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to the HOBOware software manual.
Launch Modes | Immediate start and delayed start
Offload Modes | Offload while logging; stop and offload
Battery Indication | Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.
Environmental Rating | IP68 |
| The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

• Water Level Accuracy: With accurate reference water level measurement, known water density, accurate Barometric Compensation Assistant data, and a stable temperature environment.

** Raw Pressure Accuracy: Absolute pressure sensor accuracy includes all sensor drift, temperature, and hysteresis-induced errors.

*** Changes in Temperature: Allow 10 minutes in water to achieve full temperature compensation of the pressure sensor. Maximum error due to rapid thermal changes is approximately 0.5%.