Registrador de dados HOBO de Titânio para Temp/Nível da Água (0 - 76m)

Características Destacadas

Proteção contra raios - sem longos fios de sinal, a eletrônica é blindada em uma carcaça de titânio para uso em água marinha.
O software HOBOware Pro oferece uma conversão fácil para uma leitura precisa do nível de água, totalmente compensada pela temperatura de pressão barométrica e pela densidade da água.
A medida de amostragem de múltiplas taxas permite uma coleta de amostras mais rápida em momentos críticos, como quando o bombeamento é iniciado ou interrompido.
Disponível em 4 faixas de profundidade
Ideal para utilização em poços, riachos, lagos, zonas húmidas e zonas de maré
Design de tubo sem ventilação para uma implantação fácil e confiável
Disponível nas versões em aço inoxidável e titânio
Sensor de pressão de cerâmica duradouro
Certificado de calibração NIST rastreável de 3 pontos incluído

O registrador de dados U20-001-03-Ti suporta as seguintes medições: Pressão absoluta, pressão barométrica, temperatura e nível de água

Pressure and Water Level Measurements****U20-001-03 and U20-001-03-Ti

Operation Range | 0 to 850 kPa (0 to 123.3 psia); approximately 0 to 76.5 m (0 to 251 ft) of water depth at sea level, or 0 to 79.5 m (0 to 262 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range | 69 to 850 kPa (10 to 123.3 psia), 0° to 40°C (32° to 104°F)
Burst Pressure | 1200 kPa (174 psia) or 112 m (368 ft) depth
Water Level Accuracy* | Typical error: ±0.05% FS, 3.8 cm (0.125 ft) water
Maximum error: ±0.1% FS, 7.6 cm (0.25 ft) water
Raw Pressure Accuracy** | ±0.3% FS, 2.55 kPa (0.37 psi) maximum error
Resolution | <0.085 kPa (0.012 psi), 0.87 cm (0.028 ft) water
Pressure Response Time (90%)*** | <1 second; measurement accuracy also depends on temperature response time
Temperature Measurements (All Models)
Operation Range | -20° to 50°C (-4° to 122°F)
Accuracy | ±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F), see Plot A in manual
Resolution | 0.10°C at 25°C (0.18°F at 77°F), see Plot A in manual
Response Time (90%) | 5 minutes in water (typical)
Stability (Drift) | 0.1°C (0.18°F) per year
Logger
Real-time Clock | ± 1 minute per month 0° to 50°C (32° to 122°F)
Battery | 2/3 AA, 3.6 Volt lithium, factory-replaceable
Battery Life (Typical Use) | 5 years with 1 minute or greater logging interval
Memory (Non-volatile) | 64K bytes memory (approx. 21,700 pressure and temperature samples)
Weight | Stainless steel models: approximately 210 g (7.4 oz)
Titanium models: approximately 140 g (4.8 oz)
Dimensions | 2.46 cm (0.97 inches) diameter, 15 cm (5.9 inches) length; mounting hole 6.3 mm (0.25 inches) diameter
Wetted Materials | Titanium, Viton® o-rings, acetyl cap, ceramic sensor
Logging Interval | Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to the HOBOware software manual.
Launch Modes | Immediate start and delayed start
Offload Modes | Offload while logging; stop and offload
Battery Indication | Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.
Environmental Rating | IP68 |
| The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

• Water Level Accuracy: With accurate reference water level measurement, known water density, accurate Barometric Compensation Assistant data, and a stable temperature environment.

** Raw Pressure Accuracy: Absolute pressure sensor accuracy includes all sensor drift, temperature, and hysteresis-induced errors.

*** Changes in Temperature: Allow 10 minutes in water to achieve full temperature compensation of the pressure sensor. Maximum error due to rapid thermal changes is approximately 0.5%.