HOBO® U30 Shuttle (Transportador de Datos)

Características destacadas

Lee los datos de los sistemas en el campo para transferirlos a un ordenador central.
Opcionalmente relanza el registrador de datos - sincroniza el reloj del registrador con el reloj del transbordador y (en la mayoría de los casos) configura el registro para que comience en el siguiente intervalo.
Conserva los datos en memoria no volátil, incluso si las pilas están agotadas.
Muestra el estado del registrador, incluyendo la memoria, el nivel de la batería y las lecturas del sensor.
Muestra su propio estado, incluyendo reloj, memoria y nivel de batería.
Le permite cambiar las baterías en el campo sin tener que reajustar el reloj.
Permite probar sensores inteligentes individuales

Requirements:
USB cable (provided); compatible logger with appropriate cable and/or base station
U-DT-2: HOBOware 2.6 or greater

Compatibility: HOBO U30 series systems, HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A

Logger-to-Shuttle Transfer Speed
USB: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds

Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware (see HOBOware User’s Guide for details) or changing logger batteries (10 minutes)

Ports:
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time

Batteries
Main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)

Battery Life
Main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)

Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).