HOBO® U30 Shuttle

Características Destacadas

Lê dados de sistemas no campo para depois transferir a um computador
Opcionalmente relança o registrador de dados - sincroniza o relógio do registrador com o relógio da lançadeira e (na maioria dos casos) configura o registro para começar no próximo intervalo.
Preserva os dados na memória não volátil, mesmo que as baterias estejam esgotadas
Exibe o status do registrador, incluindo memória, nível da bateria e leituras do sensor
Exibe seu próprio status, incluindo relógio, memória e nível da bateria
Permite que o usuario troque as pilhas no campo sem redefinir o relógio
Permite testar sensores inteligentes individuais

Requirements:
USB cable (provided); compatible logger with appropriate cable and/or base station
U-DT-2: HOBOware 2.6 or greater

Compatibility: HOBO U30 series systems, HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A

Logger-to-Shuttle Transfer Speed
USB: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds

Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware (see HOBOware User’s Guide for details) or changing logger batteries (10 minutes)

Ports:
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time

Batteries
Main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)

Battery Life
Main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)

Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).