Kit Básico Registrador de Datos HOBO para Nivel de Agua (0 a 30,6 m)

Características destacadas

Protección contra rayos - no hay cables de señal largos, y los componentes electrónicos están protegidos en una carcasa de acero inoxidable
El software HOBOware Pro proporciona una fácil conversión a una lectura precisa del nivel de agua, totalmente compensada por la presión barométrica, la temperatura y la densidad del agua (utilice datos de presión barométrica de una estación meteorológica cercana).
El muestreo de velocidad múltiple permite un muestreo más rápido en momentos críticos, como cuando se inicia o se detiene el bombeo.
Disponible en cuatro gamas de profundidad
Ideal para su uso en pozos, arroyos, lagos, humedales y zonas de mareas.
Diseño sin tubo de ventilación para un despliegue fácil y fiable
Sensor de presión de cerámica de larga duración

El kit KIT-S-U20-02 soporta las siguientes medidas: Presión absoluta, presión barométrica, temperatura y nivel de agua

Pressure Sensor
Operation range: 0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude
Factory calibrated range: 69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F)
Burst pressure: 500 kPa (72.5 psia) or 40.8 m (134 ft) depth
Water level accuracy:* Typical error - 0.05% FS, 1.5 cm (0.05 ft) water
Maximum error: - 0.1% FS, 3 cm (0.1 ft) water
Raw pressure accuracy:** 0.3% FS, 1.20 kPa (0.17 psi) maximum error
Resolution: < 0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water
Pressure response time 90%: < 1 second
Thermal response time (90%)†: Approximately 10 minutes in water to achieve full temperature compensation of the pressure sensor

• With accurate reference water level measurement and Barometric Compensation Assistant data
  ** Absolute pressure sensor accuracy includes all pressure drift, temperature, and hysteresis-induced errors
  † Maximum error due to rapid thermal changes is approximately 0.5%.

Temperature Sensor
Operation range: -20° to 50°C (-4° to 122°F)
Accuracy: 0.37°C at 20°C (0.67°F at 68°F)
Resolution: 0.1°C at 20°C (0.18°F at 68°F) (10-bit)
Response time (90%): 3.5 minutes in water (typical)
Stability (drift): 0.1°C (0.18°F) per year

Logger
Real-time clock: ± 1 minute per month 0° to 50°C (32° to 122°F)
Battery: 2/3 AA, 3.6 Volt Lithium, factory-replaceable
Battery life (typical use): 5 years with 1 minute or greater logging interval
Memory (non-volatile): 64K bytes memory (approx. 21,700 pressure and temperature samples)
Dimensions: 2.46 cm (0.97 inches) diameter, 15 cm (5.9 inches) length; mounting hole 6.3 mm (0.25 inches) diameter
Weight: Approximately 210 g (7.4 oz)
Wetted materials: 316 stainless steel, Viton® o-rings, acetyl cap, ceramic sensor
Shock/drop: Logger is sensitive to shocks. Handle with care and avoid any impact. Always use proper packaging when shipping the logger.
Logging interval: Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to HOBOware software manual.
Launch modes: Immediate start and delayed start
Offload modes: Offload while logging; stop and offload
Battery indication: Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.
Environmental Rating: IP68

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).