Price on request
The EIC-03002 Wind Sentry Anemometer and Vane are professional quality wind sensors which are suitable for a wide range of wind measurement applications. These moderately priced sensors are principally of thermoplastic construction providing excellent corrosion resistance, low sensor weight, and minimal parts count. In addition to being available as a set complete with crossarm, the sensors are also available separately with mounting brackets.
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
The anemometer has three hemispherical molded plastic cups. Cup wheel rotation produces an AC sine wave voltage signal with frequency directly proportional to wind speed. This AC voltage signal is induced in a coil by a two pole circular magnet mounted on the cup wheel shaft. One complete sine wave cycle is produced for each cup wheel revolution.
Wind vane position is transmitted by a 10k ohm precision conductive plastic potentiometer which requires a regulated excitation voltage. With a constant voltage applied to the potentiometer, the output signal is an analog voltage directly proportional to azimuth angle. The plastic vane is molded directly on the anodized aluminum vane shaft.
Specifications
Range
Wind speed: 0-50 m/s (112 mph)
Gust survival: 60 m/s (134 mph)
Azimuth: 360° mechanical, 355° electrical (5° open)
Threshold*
Cup Anemometer: 1.1 m/s (2.5 mph)
Vane: 1.3 m/s (2.9 mph) at 10° displacement
1.9 m/s (4.2 mph) at 5° displacement
*Nominal values - determined in accordance with ASTM standard procedures
Dynamic Response
Cup wheel distance constant: 2.3 m (7.5 ft)
Vane delay distance: 0.5 m (1.6 ft)
Damping ratio: 0.20
Signal Output
Wind speed: Magnetically induced AC sine wave voltage, 1 pulse per revolution, 1800 rpm (30 Hz) = 22.8 m/s (51.0 mph)
Azimuth: Analog DC voltage from conductive plastic potentiometer - resistance 10k, linearity 0.5%, life expectancy 20 million revolutions.
Power Required
Potentiometer excitation: Regulated voltage recommended, 5-15 Vdc
Sensor interface: 5-15 Vdc unregulated
Line driver: 12-30 Vdc unregulated (depending upon line and load resistance)
Dimensions
Overall height: 32 cm (12.6)
Crossarm length: 28 cm (11") between instrument centers
Vane length: 22 cm (8.7")
Cup wheel: 12 cm (4.7") dia
Mounting: 34 mm (1.34") dia (standard 1" pipe)
Weight
Sensors: 0.7 kg (1.5 lbs)
Shipping: 1.3 kg (3 lbs)
*Specify wind speed scaling
0-50 m/s Add suffix "M"
0-100 mph Add suffix "P"
0-100 knots Add suffix "N"
0-200 km/hr Add suffix "K"
No published specifications for this product.
LI-COR (HOBO, InTemp, LI-COR) · HOBOnet
El NUEVO Sistema de Monitorización de Campo HOBOnet de Onset proporciona una solución rentable y escalable para la monitorización de las condiciones de campo a través de la web para aplicaciones tales como la gestión de cultivos, investigación y operaciones…
LI-COR (HOBO, InTemp, LI-COR) · U30-NRC-SYS-C
The HOBO Weather Station Starter Kit combines our most rugged data logging weather station with out-of-the-box convenience. The U30/NRC accepts up to 10 plug-and-play Smart Sensors. Just plug in your sensor and it’s automatically recognized – no programming,…
LI-COR (HOBO, InTemp, LI-COR) · KIT-Intermedio-RX3004
LI-COR (HOBO, InTemp, LI-COR) · KIT-Avanzado-RX3004
Tell EIC Controls about your application.