Light/Solar Radiation/PAR

LPUVA01 – Irradiance Probe

Reference
LPUVA01

Price on request

Probe for measuring irradiance in the UVA (315 nm ... 400 nm) spectral range

Talk to a specialist

Overview

The LPUVA01 probe measures irradiance (W/m2) defined as the ratio between the radiant flux (W) passing through a surface and the surface area (m2) in the UVA (315 nm … 400 nm) spectral range.

Thanks to a new type of photodiode, LPUVA01 is blind to visible and infrared light.

Probe calibration is carried out by using a 365 nm line of a Xe-Hg lamp, filtered through a special interferential filter. Measurement is carried out by comparison with the primary standards, assigned to Delta OHM Metrological Laboratory.
This probe can be used in all processes where ultraviolet lamp emission needs to be monitored: resins and adhesives polymerization, as well as tanning lamps.

Related products

Spherical Underwater Quantum Sensor

LI-COR (HOBO, InTemp, LI-COR) · LI-193SA

Spherical Underwater Quantum Sensor

The LI-193SA Spherical Underwater Quantum Sensor measures underwater PAR from a 4pi field of view. Requires 2222UWB Underwater Cable, 2009S Lowering Frame recommended.

View product

LI-COR LI-191R Line Quantum Sensor

LI-COR (HOBO, InTemp, LI-COR) · LI-191R

LI-COR LI-191R Line Quantum Sensor

Used to measure sunlight under a plant canopy where the light field is non-uniform, the LI-191R Line Quantum Sensor measures PAR with a single detector integrating measurements over its 1-meter length. The LI-191R makes it easy to measure under-canopy light…

View product

LI-200R Quantum Sensor, 2 m cable, mV output

LI-COR (HOBO, InTemp, LI-COR) · LI-210R-SMV-2

LI-200R Quantum Sensor, 2 m cable, mV output

Pyranometer with bare leads termination. mV output and cable. Available cable lengths are 2, 5, 15 m options. Photometric Sensor with 2 meter cable and bare leads termination. mV output.

View product

LP PYRA 03 Second Class Pyranometers according to ISO 9060.

DeltaOhm - GHM Group · LPPYRA03

LP PYRA 03 Second Class Pyranometers according to ISO 9060.

The LPPYRA03 are pyranometers classified as Spectrally Flat Class C (Second Class) in accordance with ISO 9060:2018 and according to the WMO. The pyranometers are available in five versions: LPPYRA03 passive LPPYRA03AC active with current 4..20 mA output…

View product

What do you need to measure?

Tell EIC Controls about your application.