Products
Data Loggers and Sensors for monitoring indoor, outdoor and aquatic environments.
tempmate · tempmate.®-S1 V2
Package with 20 units Economic single-use GDP conform temperature logger with automated PDF & CSV reports for smart logistics. tempmate.®-S1 temperature loggers were especially developed for monitoring temperature-sensitive products throughout the entire cold…
LI-COR (HOBO, InTemp, LI-COR) · 7900-235
Set of terminal blocks, a circuit breaker, and wiring for installation in the 7900-050 Systems Enclosure to distribute power to equipment inside and outside of the enclosure.
LI-COR (HOBO, InTemp, LI-COR) · 331-05273
14-pin terminal block; for use with LI-850, LI-840/A, LI-830, LI-820, and LI-800
LI-COR (HOBO, InTemp, LI-COR) · 392-09436
Integrates LI-COR Trace Gas Analyzers with the LI-8100A system; 2 meters
LI-COR (HOBO, InTemp, LI-COR) · 9982-081
Thermistor for use with the 8250-660 Flask Sampling Kit. Thermistor includes 15 meter long cable, terminating in bare leads.
Maxim Integrated · DS1921G
The DS1921G Thermochron iButton is a rugged, self-sufficient system that measures temperature and records the result in a protected memory section. The recording is done at a user-defined rate, both as a direct storage of temperature values as well as in the…
LI-COR (HOBO, InTemp, LI-COR) · 9968-162
Thermocouple Adapter Cable for 6800-19 Custom Chamber, 6800-09 Soil CO2 Flux Chamber, and 8200-01S Smart Chamber.
LI-COR (HOBO, InTemp, LI-COR) · 9977-038
For use in the LI-7700 Open Path CH4 Analyzer.
LI-COR (HOBO, InTemp, LI-COR) · NIST-RH-THREEPOINT
Onset offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). This includes single-point (50% RH @ 25C) or three-point (25, 50,…
LI-COR (HOBO, InTemp, LI-COR) · BOOT-TIDBIT-BK
A thermoplastic elastomer boot that provides cushioning for use in harsh conditions. Offered in black to minimize underwater visibility. Five boots included.
LI-COR (HOBO, InTemp, LI-COR) · 8100-664
Used to collect samples from the same air stream used to measure CO2 flux for further trace gas analysis using a GC or other method. The 8100-664 accessory is an assembled section of air line with a T-fitting and septum, and quick connectors at each end. This…
LI-COR (HOBO, InTemp, LI-COR) · 35TB
For use with the LI-3050C. Requires two for replacement.
LI-COR (HOBO, InTemp, LI-COR) · 3100TBL
Lower transparent belt Upper transparent belt
LI-COR (HOBO, InTemp, LI-COR) · 3100TBU
Lower transparent belt Upper transparent belt
LI-COR (HOBO, InTemp, LI-COR) · 550FM
Tripod mounting attachment for LI-550F TriSonica Mini with flat bottom
LI-COR (HOBO, InTemp, LI-COR) · 550PM
Tripod mounting attachment for LI-550P TriSonica Mini with pipe mount
LI-COR (HOBO, InTemp, LI-COR) · 550USB
USB to RS-232 Interface for TriSonica Sensor Products LI-550 and LI-560
LI-COR (HOBO, InTemp, LI-COR) · 9861-036
Secures Bev-A-line 1/8" ID tubing to air inlets. Used with LI-800, LI-820 LI-840/A, LI-830, LI-850, LI-6400/XT, LI-610 etc.
LI-COR (HOBO, InTemp, LI-COR) · 9982-073
Tubing and T-Splitter for connecting two gas analysers to the inlet/outlet connectors of the Multiplexer LI-8250 or the Smart Chamber. P/N 9982-011 Cable Assembly needed, one per analyzer.
LI-COR (HOBO, InTemp, LI-COR) · 434-17187
Thermocouple used with the 6800-19 Custom Chamber Adapter (adapter cable, part number 9968-162, is sold separately).
LI-COR (HOBO, InTemp, LI-COR) · 374-04317
Thermocouple wire; 24 AWG Duplex "E" Type; Used with the LI-6400/XT
LI-COR (HOBO, InTemp, LI-COR) · TC6-J
The Type J 6 ft Beaded Thermocouple probe includes 1.8m (6') of insulated 30-AWG wire wound on an integrated spool caddy /subminiature connector. Color-coded for type J (black) thermocouples according to the ANSI standard.
Tell EIC Controls about your application.