LI-COR (HOBO, InTemp, LI-COR) · U-BOLT-KIT2
1-5/8" U-bolts (Qty 2)
Two 1-5/8" saddle-clamp U-bolts for mounting HOBO USB Micro Station, U30-NRC, RX3000 Remote Monitoring System or RX2100 MicroRX Station on Onset tripods or masts.
Products
Mounting and Brackets
Filters
LI-COR (HOBO, InTemp, LI-COR) · M-MPB
1.5 meter mast
Ideal for mounting HOBO weather station loggers and sensors, and HOBO data logging rain gauges. Can be driven into the ground, mounted in concrete, or attached to a structure.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-1-300
1/16" Stainless Steel Cable 300ft
A 300-foot length of 1/16-inch diameter Teflon-coated stainless-steel cable, coiled and bound.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-1-50
1/16" Stainless Steel Cable 50ft
A 50-foot length of 1/16-inch diameter Teflon-coated stainless-steel cable, coiled and bound.
LI-COR (HOBO, InTemp, LI-COR) · 7900-135
14-plate Radiation Shield
For Vaisala HMP155 Humidity and Temperature probe
LI-COR (HOBO, InTemp, LI-COR) · M-MPA
3m mast
Ideal for mounting Onset weather station loggers and sensors. Can be mounted in concrete, attached to a structure, or used to extend Onset tripod masts (1-5/8" diameter).
LI-COR (HOBO, InTemp, LI-COR) · 7900-340
Analyzer Mounting Kit
To mount an LI-7500A or LI-7200 analyzer; Includes Crossover Fitting, Swivel Mount and Riser Bar
LI-COR (HOBO, InTemp, LI-COR) · M-BRK
Bracket Mount for MX2308 & MX2309 Light Sensors
The M-BRK Bracket Mount is designed for use with LI-COR light sensors. This bracket mount accessory includes the necessary hardware for securely attaching the 2003S Mounting & Leveling Fixture to a mounting pole or pipe. Included MX2300 Mounting Bracket…
LI-COR (HOBO, InTemp, LI-COR) · M-BRK-2
Bracket Mount for MX2502 Underwater PAR Logger
A key deployment accessory for underwater monitoring, this plate is specifically engineered to attach the complete MX2502 logger assembly to a rebar stake, with slots that allow you to rotate the plate so that the logger is tilt-corrected. Requiring only four…
LI-COR (HOBO, InTemp, LI-COR) · U23-RS-CLAMPKIT
Clamp Kit for U23-001
This clamp allows the U23-001 or U23-004 to be mounted in the RS1 and M-RSA radiation shields. It is NOT required for use with other HOBO Pro v2 models.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-1-CRIMP
Crimp Sleeve 12 Pack
An envelope of twelve 3/8-inch long stainless-steel crimp sleeves for use with 1/16" Teflon-coated stainless-steel cable.
LI-COR (HOBO, InTemp, LI-COR) · 7900-342
Cross-over Fitting
To mount an LI-7200, LI-7700, WindMaster® or WindMaster® Pro.
LI-COR (HOBO, InTemp, LI-COR) · A-H22-DINMOUNT-1
DIN Mounting Feet Kit
When used with the Mounting Feet Kit (A-H22-MOUNT-1), the HOBO Energy Data Logger system snaps securely to standard 32mm and 35mm DIN rails.
LI-COR (HOBO, InTemp, LI-COR) · M-CAB
Half Cross Arm
For use with Onset tripods or masts, the half cross arm assures unobstructed wind measurement. Half cross arm (49cm/19.2in) provides mounting for one wind sensor
LI-COR (HOBO, InTemp, LI-COR) · A-H22-MOUNT-1
HOBO H22 Energy Logger Mount Feet Kit
Optional mounting feet attach to the back of the HOBO Energy Data Logger system to allow for more permanent mounting using standard 3/8 flathead screws (included)
LI-COR (HOBO, InTemp, LI-COR) · BOOT-MX2201-2202
HOBO Pendant Mounting Boot
Provides a reliable way to mount HOBO Pendant MX2201 and MX2202 loggers to non-flat surfaces such as rebar or posts. - Required for mounting these loggers on non-flat surfaces - When used on flat surfaces, the loggers can be easily removed for servicing - Kit…
LI-COR (HOBO, InTemp, LI-COR) · BOOT-MX2203-GR
HOBO TidbiT MX2203 Boot Pack of 5 (Gray)
The optional MX2203 thermoplastic elastomer (Santoprene) boot provides cushioning for use in harsh conditions. Offered only in gray. Five boots included.
LI-COR (HOBO, InTemp, LI-COR) · M-TPA-KIT
HOBO Weather Station 3-Meter Tripod Kit
This kit has everything you need for a 3-meter tripod configuration of the HOBO Weather Station or HOBO Micro Station. The 3-meter tripod accommodates moderately sloping terrain. The kit includes a 3-meter tripod (M-TPA), Grounding Kit (M-GKA), Guy Wire Kit…
LI-COR (HOBO, InTemp, LI-COR) · 180-05
LI-180 Tripod Bracket
Tripod Bracket Mount for the LI-180 Spectrometer. Useful for long-term, repeated measurements.
LI-COR (HOBO, InTemp, LI-COR) · 9975-010
LI-7500x Head Mounting Post
LI-7500/A/RS/DS Head Mounting Post
LI-COR (HOBO, InTemp, LI-COR) · M-LLA
Light Sensor Level
Simply drop the light sensor level over the PAR or solar radiation sensor to determine if the sensor is level. Purchase one for use on any number of light sensors.
LI-COR (HOBO, InTemp, LI-COR) · 7900-350
Light Sensor Mount
To mount a net radiometer and two light sensors (7900-190 Quantum or 7900-195 Pyranometer) to the cross arm.
LI-COR (HOBO, InTemp, LI-COR) · 2009S
Lowering Frame
The 2009S Lowering Frame is an aluminum fixture to allow support and orientation of Underwater Quantum Sensors. Provides for the placement of two LI-192SA Underwater Quantum Sensors, one each for downwelling or upwelling radiation or a single LI-193SA…
LI-COR (HOBO, InTemp, LI-COR) · M-FRM
Lowering Frame for MX2502 Underwater PAR Logger
A key deployment accessory for underwater monitoring, this lowering frame and mounting accessory is specifically engineered to attach ZebraTech's Hydro-Wiper battery pack and clamp assembly that securely holds an MX2502 Underwater PAR data logger.
What do you need to measure?
Tell EIC Controls about your application.