Products
Accessories
Subcategories
Filters
Applications
Measurements
LI-COR (HOBO, InTemp, LI-COR) · OLUBE-2-00
O-ring Lube
Useful as an assembly aid for O-rings and seals, this silicone oil lubricant can be used as an assembly lubricant on all rubber polymers and makes an excellent thread lubricant and anti-seize agent. Parker’s Super O-Lube offers outstanding performance in…
LI-COR (HOBO, InTemp, LI-COR) · NIST-RH-ONEPOINT
One Point NIST RH Certification
Onset offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). This includes single-point (50% RH @ 25C) or three-point (25, 50,…
LI-COR (HOBO, InTemp, LI-COR) · 800-906
Optical Detector
Detector for LI-840/840A, LI-850, LI-870, and LI-8100/8100A
LI-COR (HOBO, InTemp, LI-COR) · 800-903
Optical Detector LI-800 and LI-820
Optical detector for the LI-800 and LI-820 CO2 Gas Analyzers
LI-COR (HOBO, InTemp, LI-COR) · 800-902
Optical Source Kit
Replacement optical source for the LI-800, LI-820, LI-830, LI-840/A and LI-850.
LI-COR (HOBO, InTemp, LI-COR) · 8100-902
Optical Source Replacement Kit
Optical source for the LI-8100/A
LI-COR (HOBO, InTemp, LI-COR) · CASE-PELICAN-1510
Pelican Case
The largest, most durable airline-legal carry-on available, the new 1510 Pelican case provides safe and convenient transport of your HOBO data logging equipment. This watertight, crush-proof, and dust-proof case features a sturdy but lightweight design that…
LI-COR (HOBO, InTemp, LI-COR) · UA-PARTSKIT
Pendant® Replacement Parts Kit
Pendant replacement parts kit includes pendant case, end cap, O-ring, two screws, and silicone-based O-ring grease.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-10
pH 10.01 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-4
pH 4.01 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-7
pH 7.00 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · M-PLT
Plate Mount for LI-COR Light Sensor Bracket
The M-PLT Plate Mount, LI-COR Light Sensors is designed for use with LI-COR Light Sensors. This plate mount accessory includes the necessary hardware for securely attaching the fixture to the M-LBB Light Sensor Bracket and 2003S Mounting & Leveling Fixture.…
LI-COR (HOBO, InTemp, LI-COR) · W-PLUG
Plug for Unused MX800 Logger Sensor Inputs
A protective plug to seal unused sensor inputs on MX800 data loggers. The primary function of this plug is to make the MX802 logger weatherproof when it's being used to record barometric pressure without a sensor attached.
LI-COR (HOBO, InTemp, LI-COR) · 9982-008
Power Cable
Smart Chamber to LI-870 power; 2.5 x 5.5 mm PLUG IP68 1.2 m cable
LI-COR (HOBO, InTemp, LI-COR) · 9975-030
Power Cable
For use with the LI-7500DS/A/RS and LI-7200/RS CO2/H2O Analyzers, LI-7700 CH4 Analyzer, and the 7200-101/102 Flow Module. For the LI-7500, purchase part number 392-05619.
LI-COR (HOBO, InTemp, LI-COR) · 392-05619
POWER CABLE (LI-7500)
For use with the LI-7500 Open Path CO2/H2O Analyzer only. For the LI-7500A, purchase part number 9975-030
What do you need to measure?
Tell EIC Controls about your application.