LI-COR (HOBO, InTemp, LI-COR) · HUM-UPS-500
Replacement RH sensor for H8, U10, or UX100-003 indoor data logger
Replacement relative humidity sensor for H8, U10, or UX100-003 indoor data logger
Products
Accessories
Subcategories
Filters
Applications
Measurements
LI-COR (HOBO, InTemp, LI-COR) · HUM-RHPCB-3C
Replacement RH Sensor for UX100-011A
Replacement relative humidity sensor for UX100-011A.
LI-COR (HOBO, InTemp, LI-COR) · 9972-007S
Replacement Temp Thermocouple LI-7200/RS
For use with the LI-7200. Thermocouple PCA (cell T Sensor).
LI-COR (HOBO, InTemp, LI-COR) · 6512-095
Round Calibration Disks
Older model; To calibrate leaf area meter models LI-3000C and LI-3100. Replaced by P/N 9931-021
LI-COR (HOBO, InTemp, LI-COR) · RXMOD-R1
RX3000 Relay Module
The optional Relay Module allows for up to three individual relays to be activated or pulsed in response to alarms. Each relay contact closure can be configured as normally open or normally closed through HOBOlink. A HOBO RX3000 is required for this product.
LI-COR (HOBO, InTemp, LI-COR) · RX3004-CH-KIT-REP
RX3004 Channel Kit Replacement
Used to provide a weather-tight seal for external sensor cable connections to the RX3004 station, this channel kit contains all the replacement parts needed to replace the original assembly provided with the station. Included in this kit:Top Cable Mold Bottom…
LI-COR (HOBO, InTemp, LI-COR) · RXW-BRACKET
RXW Mounting Kit
This bracket is required for mounting RXW sensor nodes, repeaters, and managers.
LI-COR (HOBO, InTemp, LI-COR) · 9960-093
Sample or Scrub Tube
Columnar tube used with small samples or to hold desiccant and scrub chemicals.
LI-COR (HOBO, InTemp, LI-COR) · 7000-950
Scrub Bottle Kit, LI-7000
Prepared with Ascarite II and magnesium perchlorate. Order only when ready to use. Includes two small and two large bottles. For use with the LI-7000 Closed Path CO2/H2O Analyzer only.
LI-COR (HOBO, InTemp, LI-COR) · 8100-604
Sensor Leveling Stake
Used to fix and level a LI-COR® LI-190R PAR sensor in the soil. Includes Part Number 2003S Mounting & Leveling fixture.
LI-COR (HOBO, InTemp, LI-COR) · 9975-016
Serial Cable
Replaced by 392-04993, RS-232 cable for LI-6400. 9-pin to 9-pin.
LI-COR (HOBO, InTemp, LI-COR) · 6400-27
Serial to USB Adapter
Used with LI-COR instruments that provide serial output via an RS-232 cable.
LI-COR (HOBO, InTemp, LI-COR) · NIST-SETUP
Setup Charge for NIST Traceable Certification
Temperature point certification charge on a per-logger basis. This service provides testing and certification of Onset temperature data loggers' accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). For each…
LI-COR (HOBO, InTemp, LI-COR) · 84-000010
Slotted 2" PVC 2-ft Length
Whether you've started with one of our Standard or Premium Stilling Well Kits that offer approximately a four-foot depth, or are building your own stilling well from the ground up...you may need additional lengths of slotted or solid PVC pipe to customize the…
LI-COR (HOBO, InTemp, LI-COR) · 9915-005
Small Carrying Case
This small plastic carrying case is sold with the LI-1500/G Light Sensor Logger. The internal foam is cut to support the LI-1500 and two light sensors. The LI-250A Light Meter can also fit snugly within the case.
LI-COR (HOBO, InTemp, LI-COR) · DESICCANT1
Small Desiccant Pack (25-count)
Small desiccants suitable for use in the Pendant (use DESICCANT5 for UA-003-64) and HOBO Pro v2 data loggers, packaged as a set of 25 desiccants.
LI-COR (HOBO, InTemp, LI-COR) · 6800-89
Small Sample Chamber
Chamber that provides the ability to measure CO2 respiration from insects, other very small animals, or small fruits. Provides a measure of CO2 exchange per unit of mass over time. Chamber includes: + (1) 9968-182 Custom Chamber Block
LI-COR (HOBO, InTemp, LI-COR) · S-ADAPT-6
Smart Sensor Consolidator Box Adapter
Allows users to connect up to six Smart Sensors in a water-resistant enclosure to one sensor extension cable back to HOBO stations with Smart Sensor inputs
LI-COR (HOBO, InTemp, LI-COR) · S-EXT-M010
Smart Sensor Extension Cable - 10m length
A 10-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
LI-COR (HOBO, InTemp, LI-COR) · S-EXT-M025
Smart Sensor Extension Cable - 25m length
A 25-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
LI-COR (HOBO, InTemp, LI-COR) · S-EXT-M002
Smart Sensor Extension Cable - 2m length
A 2-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
What do you need to measure?
Tell EIC Controls about your application.