LI-COR (HOBO, InTemp, LI-COR) · U26-CAL-SOL
0% DO Sodium Sulfite Solution
Used for calibrating the HOBO Dissolved Oxygen Data Logger or MX800 series dissolved oxygen sensor at 0% saturation, which is optional. Concentration: 5% w/v
Products
Certification and Calibration
Filters
LI-COR (HOBO, InTemp, LI-COR) · COND-CAL-2
1,413 uS/cm Calibration Solution
These solutions’ conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle, and prepared against a NIST-traceable potassium chloride solution. Lot number and expiration date are…
LI-COR (HOBO, InTemp, LI-COR) · COND-CAL-3
12,880 uS/cm Calibration Solution
These solutions’ conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle, and prepared against a NIST-traceable potassium chloride solution. Lot number and expiration date are…
LI-COR (HOBO, InTemp, LI-COR) · COND-CAL-4
80,000 uS/cm Calibration Solution
These solutions’ conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle, and prepared against a NIST-traceable potassium chloride solution. Lot number and expiration date are…
LI-COR (HOBO, InTemp, LI-COR) · COND-CAL-1
84 uS/cm Calibration Solution
These solutions’ conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle, and prepared against a NIST-traceable potassium chloride solution. Lot number and expiration date are…
LI-COR (HOBO, InTemp, LI-COR) · 9931-021
Area Meter Calibration Plate
Perforated calibration disk, 10 cm², to calibrate series LI-3000 and LI-3100 leaf area meters.
LI-COR (HOBO, InTemp, LI-COR) · 9968-258
LI-6800 Zero Calibration Kit
Includes two columns to scrub CO2 and H2O from air during a zero calibration.
LI-COR (HOBO, InTemp, LI-COR) · NIST-TEMP-POINT
NIST Temperature Point Certification
Temperature point certification charge on a per-data logger basis. This service provides testing and certification of Onset temperature data loggers' accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). For each…
LI-COR (HOBO, InTemp, LI-COR) · NIST-RH-ONEPOINT
One Point NIST RH Certification
Onset offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). This includes single-point (50% RH @ 25C) or three-point (25, 50,…
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-10
pH 10.01 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-4
pH 4.01 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-7
pH 7.00 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · 6512-095
Round Calibration Disks
Older model; To calibrate leaf area meter models LI-3000C and LI-3100. Replaced by P/N 9931-021
LI-COR (HOBO, InTemp, LI-COR) · NIST-SETUP
Setup Charge for NIST Traceable Certification
Temperature point certification charge on a per-logger basis. This service provides testing and certification of Onset temperature data loggers' accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). For each…
LI-COR (HOBO, InTemp, LI-COR) · NIST-RH-THREEPOINT
Three Point NIST RH Certification
Onset offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). This includes single-point (50% RH @ 25C) or three-point (25, 50,…
LI-COR (HOBO, InTemp, LI-COR) · 9975-054
User Calibration Kit
Used to perform user calibration. Includes: + (1) 222-01824 Bev A Line Tubing, 15 ft + (1) 9975-024 Calibration Shroud + (1) 9975-014 Gaskets, qty. 10
What do you need to measure?
Tell EIC Controls about your application.