Sensor Inalámbrico de Entrada de Pulso - Switch Electrónico

El sensor de entrada de pulsos inalámbrico HOBOnet se conecta a sensores con salida de pulsos. Este sensor es compatible con cierres de interruptores electrónicos, como salidas FET o de colector abierto, o señales lógicas de nivel CMOS. Los sensores inalámbricos HOBOnet comunican los datos directamente a la estación meteorológica HOBO RX3000 o transmiten los datos a través de otros sensores inalámbricos a la estación central. Están preconfigurados y listos para ser implementados, y se accede a los datos a través de HOBOlink, la innovadora plataforma de software basada en la nube de Onset.

Características destacadas

Frecuencia máxima de entrada 120 Hz (120 impulsos por segundo)
Cierre electrónico de interruptor de estado sólido o salida digital de nivel CMOS

Funciones inalámbricas

Tecnología inalámbrica mesh auto-reparadora de 868 MHz
Alcance inalámbrico de 450 a 600 metros y hasta cinco saltos
Hasta 50 sensores inalámbricos por RX3000
Pulsar un botón para unirse a la red inalámbrica HOBOnet
Memoria integrada para garantizar que no se pierdan datos
Funciona con pilas AA recargables y panel solar integrado

El sensor RXW-UCC-xxx soporta la siguiente medición: Entrada de pulsos

Sensor | RXW-UCC-xxx

For Electronic Switches
---|---
Measurement Input Frequency | 120 Hz (120 pulses per second)
Measurement Range | 0-65,533 pulses per logging interval
Resolution | 1 pulse
Lockout Time | 45 µs ±10%
Recommended Input Type | Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)
Preferred Switch State* | Active low input
Edge Detection | Falling edge, Schmitt Trigger buffer (logic levels: low =2.7 V)
Minimum Pulse Width | 1 ms
Input/Output Impedance | 100 K?
Open Circuit Input Voltage | 3.3 V
Maximum Input Voltage | 3.6 V
User Connection | 24 AWG wires, 2 leads: white(+), black(-)
Wireless Mote
Operating Temperature Range | -25° to 60°C (-13° to 140°F) with rechargeable batteries
-40 to 70°C (-40 to 158°F) with lithium batteries
Radio Power | 12.6 mW (+11 dBm) non-adjustable
Transmission Range | Reliable connection to 457.2 m (1,500 ft) line of sight at 1.8 m (6 ft) high
Reliable connection to 609.6 m (2,000 ft) line of sight at 3 m (10 ft) high
Wireless Data Standard | IEEE 802.15.4
Radio Operating Frequencies | RXW-UCC-900 and RXW-UCD-900: 904-924 MHz
RXW-UCC-868 and RXW-UCD-868: 866.5 MHz
RXW-UCC-922 and RXW-UCD-922: 916-924 MHz
Modulation Employed | OQPSK (Offset Quadrature Phase Shift Keying)
Data Rate | Up to 250 kbps, non-adjustable
Duty Cycle | <1%
Maximum Number of Motes | 50 motes per one RX Wireless Sensor Network
Battery Type/
Power Source | Two AA 1.2 V rechargeable NiMH batteries powered by built-in solar panel or two AA 1.5 V lithium batteries for operating conditions of -40 to 70°C (-40 to 158°F)
Battery Life | With NiMH batteries: Typical 3-5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F) and positioned toward the sun (see Deployment and Mounting), operation outside this range will reduce the battery service life
With lithium batteries: 1 year, typical use
Memory | 16 MB
Dimensions | Cable length: 6.5 m (21.3 ft.)
Mote: 16.2 x 8.59 x 4.14 cm (6.38 x 3.38 x 1.63 inches)
Weight | Cable: 250 g (9 oz)
Mote: 223 g (7.87 oz)
Materials | Mote: PCPBT, silicone rubber seal
Environmental Rating | Mote: IP67, NEMA 6
Compliance Marks | RXW-UCC-900
| RXW-UCC-868
| RXW-UCC-922