
Pulse Input - Electronic Switch Sensor
Price on request
Compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals. A complete system requires at least one HOBO RX3000 Remote Monitoring Station, a HOBOnet Wireless Manager (RXMOD-RXW-xxx), and a HOBOnet Wireless Sensor. HOBOnet Wireless Repeaters (RX-RPTR-xxx) can be added to extend the range.
- Sensor RXW-UCC-xxx
- Measurement Input Frequency 120 Hz (120 pulses per second)
- Measurement Range 0-65,533 pulses per logging interval
- Resolution 1 pulse
- Lockout Time 45 µs ±10%
- Preferred Switch State* Active low input
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
Overview
The HOBOnet Wireless Pulse Input Sensor connects to sensors with a pulse output. This sensor is compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals. HOBOnet Wireless Sensors communicate data directly to the HOBO RX3000 weather station or pass data through other wireless sensors back to the central station. They are preconfigured and ready to deploy, and data is accessed through HOBOlink, Onset’s innovative cloud-based software platform.
Highlighted Features
Maximum input frequency 120 Hz (120 pulses per second)
Electronic solid-state switch closure or CMOS-level digital output
Wireless Features
868 MHz wireless mesh self-healing technology
450 to 600 meter wireless range and up to five hops
Up to 50 wireless sensors per RX3000
Simple button-push to join the HOBOnet wireless network
Onboard memory to ensure no data loss
Powered by rechargeable AA batteries and built-in solar panel
The RXW-UCC-xxx sensor supports the following measurement: Pulse Input
Sensor | RXW-UCC-xxx
For Electronic Switches
---|---
Measurement Input Frequency | 120 Hz (120 pulses per second)
Measurement Range | 0-65,533 pulses per logging interval
Resolution | 1 pulse
Lockout Time | 45 µs ±10%
Recommended Input Type | Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)
Preferred Switch State* | Active low input
Edge Detection | Falling edge, Schmitt Trigger buffer (logic levels: low =2.7 V)
Minimum Pulse Width | 1 ms
Input/Output Impedance | 100 K?
Open Circuit Input Voltage | 3.3 V
Maximum Input Voltage | 3.6 V
User Connection | 24 AWG wires, 2 leads: white(+), black(-)
Wireless Mote
Operating Temperature Range | -25° to 60°C (-13° to 140°F) with rechargeable batteries
-40 to 70°C (-40 to 158°F) with lithium batteries
Radio Power | 12.6 mW (+11 dBm) non-adjustable
Transmission Range | Reliable connection to 457.2 m (1,500 ft) line of sight at 1.8 m (6 ft) high
Reliable connection to 609.6 m (2,000 ft) line of sight at 3 m (10 ft) high
Wireless Data Standard | IEEE 802.15.4
Radio Operating Frequencies | RXW-UCC-900 and RXW-UCD-900: 904-924 MHz
RXW-UCC-868 and RXW-UCD-868: 866.5 MHz
RXW-UCC-922 and RXW-UCD-922: 916-924 MHz
Modulation Employed | OQPSK (Offset Quadrature Phase Shift Keying)
Data Rate | Up to 250 kbps, non-adjustable
Duty Cycle | <1%
Maximum Number of Motes | 50 motes per one RX Wireless Sensor Network
Battery Type/
Power Source | Two AA 1.2 V rechargeable NiMH batteries powered by built-in solar panel or two AA 1.5 V lithium batteries for operating conditions of -40 to 70°C (-40 to 158°F)
Battery Life | With NiMH batteries: Typical 3-5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F) and positioned toward the sun (see Deployment and Mounting), operation outside this range will reduce the battery service life
With lithium batteries: 1 year, typical use
Memory | 16 MB
Dimensions | Cable length: 6.5 m (21.3 ft.)
Mote: 16.2 x 8.59 x 4.14 cm (6.38 x 3.38 x 1.63 inches)
Weight | Cable: 250 g (9 oz)
Mote: 223 g (7.87 oz)
Materials | Mote: PCPBT, silicone rubber seal
Environmental Rating | Mote: IP67, NEMA 6
Compliance Marks |
RXW-UCC-900
|
RXW-UCC-868
|
RXW-UCC-922
Specifications
| Property | Value |
|---|---|
| Sensor | RXW-UCC-xxx |
| Measurement Input Frequency | 120 Hz (120 pulses per second) |
| Measurement Range | 0-65,533 pulses per logging interval |
| Resolution | 1 pulse |
| Lockout Time | 45 µs ±10% |
| Recommended Input Type | Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector) |
| Preferred Switch State* | Active low input |
| Edge Detection | Falling edge, Schmitt Trigger buffer (logic levels: low =2.7 V) |
| Minimum Pulse Width | 1 ms |
| Input/Output Impedance | 100 K? |
| Open Circuit Input Voltage | 3.3 V |
| Maximum Input Voltage | 3.6 V |
| User Connection | 24 AWG wires, 2 leads: white(+), black(-) |
| Operating Temperature Range | -25° to 60°C (-13° to 140°F) with rechargeable batteries |
| Radio Power | 12.6 mW (+11 dBm) non-adjustable |
| Transmission Range | Reliable connection to 457.2 m (1,500 ft) line of sight at 1.8 m (6 ft) high |
| Wireless Data Standard | IEEE 802.15.4 |
| Radio Operating Frequencies | RXW-UCC-900 and RXW-UCD-900: 904-924 MHz |
| Modulation Employed | OQPSK (Offset Quadrature Phase Shift Keying) |
| Data Rate | Up to 250 kbps, non-adjustable |
| Duty Cycle | <1% |
| Maximum Number of Motes | 50 motes per one RX Wireless Sensor Network |
| Power Source | Two AA 1.2 V rechargeable NiMH batteries powered by built-in solar panel or two AA 1.5 V lithium batteries for operating conditions of -40 to 70°C (-40 to 158°F) |
| Battery Life | With NiMH batteries: Typical 3-5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F) and positioned toward the sun (see Deployment and Mounting), operation outside this range will reduce the battery service life |
| Memory | 16 MB |
| Dimensions | Cable length: 6.5 m (21.3 ft.) |
| Weight | Cable: 250 g (9 oz) |
| Materials | Mote: PCPBT, silicone rubber seal |
| Environmental Rating | Mote: IP67, NEMA 6 |
| Compliance Marks |  RXW-UCC-900 |
Documents
Applications
Measurements
Related products


LI-COR (HOBO, InTemp, LI-COR) · HOBOnet
Sistema HOBOnet Sensores inalámbricos hasta 600m de alcance
El NUEVO Sistema de Monitorización de Campo HOBOnet de Onset proporciona una solución rentable y escalable para la monitorización de las condiciones de campo a través de la web para aplicaciones tales como la gestión de cultivos, investigación y operaciones…

LI-COR (HOBO, InTemp, LI-COR) · RXMOD-RXW-868
HOBOnet Manager
The HOBOnet Wireless Manager module is installed in an RX3000 station. Data is transmitted wirelessly from sensors across the network to the RX3000 station and then uploaded to HOBOlink, Onset’s innovative cloud-based software platform.
What do you need to measure?
Tell EIC Controls about your application.



