Brand
Agricultural Research · Environmental Research · Energy · Weather
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP10
The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-2.5-STEREO
An external input cable with 13mm tinned braided wire leads. Voltage input specifications vary with attached data logger.Overall length of this cable is 1.8m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP24
The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP5
The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · U26-CAL-SOL
Used for calibrating the HOBO Dissolved Oxygen Data Logger or MX800 series dissolved oxygen sensor at 0% saturation, which is optional. Concentration: 5% w/v
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-150
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-300
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · S-RGA-M002
Measures rainfall with intensity up to five inches per hour with a resolution of 0.01 inch, and 1% accuracy for rainfall rates up to 1"/hour. The tipping bucket mechanism is mounted on a stainless-steel shaft with brass bearings. This model includes a 2m…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-0.4
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-0.6
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · COND-CAL-2
These solutions’ conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle, and prepared against a NIST-traceable potassium chloride solution. Lot number and expiration date are…
LI-COR (HOBO, InTemp, LI-COR) · U-BOLT-KIT2
Two 1-5/8" saddle-clamp U-bolts for mounting HOBO USB Micro Station, U30-NRC, RX3000 Remote Monitoring System or RX2100 MicroRX Station on Onset tripods or masts.
LI-COR (HOBO, InTemp, LI-COR) · S-ADAPT-5
A 5-inch extension cable with a 2-for-1 splitter TEE junction for doubling Smart Sensor RJ12 port connections.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-1.0
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-W-1.0
Provides the connection between the HOBO MX802 logger and a Conductivity sensor or CTD sensor. - Includes strain relief and Kevlar strength member for suspending sensors in a constant position - Easy to attach or change
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-1.2
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-1.4
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · M-MPB
Ideal for mounting HOBO weather station loggers and sensors, and HOBO data logging rain gauges. Can be driven into the ground, mounted in concrete, or attached to a structure.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-1.6
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-1.8
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-1-300
A 300-foot length of 1/16-inch diameter Teflon-coated stainless-steel cable, coiled and bound.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-1-50
A 50-foot length of 1/16-inch diameter Teflon-coated stainless-steel cable, coiled and bound.
Tell EIC Controls about your application.