
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-100
100 Amp Accu-CT Split-Core Current Transformer 333mV Sensor
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Brand
Agricultural Research · Environmental Research · Energy · Weather

LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-100
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

LI-COR (HOBO, InTemp, LI-COR) · S-THB-M002
The 12-bit Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the…

LI-COR (HOBO, InTemp, LI-COR) · S-THB-M008
The 12-bit Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the…

LI-COR (HOBO, InTemp, LI-COR) · S-VIA-CM14
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external…

LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-020
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-250
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-300
The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…

LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-050
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.

LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-600
The Magnelab 600-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…

LI-COR (HOBO, InTemp, LI-COR) · S-UCC-M006
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a…

LI-COR (HOBO, InTemp, LI-COR) · T-DCI-F350-W5x3
The F350 series is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics. In products where segregation of the sensing element and electronics is desirable, such as…

LI-COR (HOBO, InTemp, LI-COR) · MX1104
The HOBO MX1104 multi-channel data logger measures and transmits temperature, relative humidity, and light intensity data wirelessly. It also includes an external analog input to attach a variety of additional sensors. This self-contained wireless data logger…

LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5200-10S
The T-CDI-5200-10S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…

LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5400-20S
The T-CDI-5400-20S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…

LI-COR (HOBO, InTemp, LI-COR) · S-UCD-M001
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of…

LI-COR (HOBO, InTemp, LI-COR) · S-UCD-M006
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of…

LI-COR (HOBO, InTemp, LI-COR) · T-VER-E50B2
Build better energy efficiency and power management with the E50B2 Power & Energy Meter. This cost-effective sensor is simple to deploy and can either be installed on standard DIN rail or be surface mounted. The E50B2 integrates with HOBO UX, U30, ZW, H22,…

LI-COR (HOBO, InTemp, LI-COR) · EG4115
The EG4115 Core is a 15-channel energy meter with 0.5% revenue-grade accuracy compliance and the ability to measure residential or commercial circuit panels, up to 3-phase 277/480VAC and 6900A. The meter has HomePlug AV powerline communication, an Ethernet…

LI-COR (HOBO, InTemp, LI-COR) · EG4130
The EG4130 Core is a 30-channel energy meter with 0.5% revenue-grade accuracy compliance and the ability to measure residential or commercial circuit panels, up to 3-phase 277/480VAC and 6900A. The meter has HomePlug AV powerline communication, an Ethernet…

LI-COR (HOBO, InTemp, LI-COR) · S-UCC-M001
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a…

LI-COR (HOBO, InTemp, LI-COR) · S-FS-TRMSA-D
The 15-bit two-channel FlexSmart True RMS Current / Voltage Module accepts an input range of 5mV to 512mV and is compatible with 333mV FS output sensors. Field wiring is 2-wire via screw terminals. NOTE: If using the S‐FS‐TRMSA‐D with a U30‐GSM or…

LI-COR (HOBO, InTemp, LI-COR) · U23-003
The HOBO Pro v2 2x External Temperature Data Logger is a weatherproof data logger with two external soil/water temperature probes on 6-foot cables for fast sensor response and deployment in tight spaces.

LI-COR (HOBO, InTemp, LI-COR) · UX120-006M
The HOBO UX120-006M Analog Data Logger is a high-performance, LCD display data logger for building performance monitoring applications. As Onset’s highest-accuracy data logger, it provides twice the accuracy of previous models, a deployment-friendly LCD, and…

LI-COR (HOBO, InTemp, LI-COR) · MX1105
The HOBO MX1105 multi-channel data logger, with four-channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device via Bluetooth Low Energy (BLE) technology. This self-contained wireless data logger lets you use your…
Tell EIC Controls about your application.