12-bit Voltage Input Adapter Sensor
Price on request
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering which improves measurement accuracy with 32 readings/sample.
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
Overview
Highlighted Features
12-bit resolution
Digital filtering improves measurement accuracy with 32 readings/sample—4-20 mA adapter has 60 Hz noise rejection
Measurement averaging over logging interval further enhances accuracy
Plug-in modular connector for easy interface with HOBO® Weather Station or HOBO® Micro Station data loggers
Screw terminal for connecting to sensors
Micro Station has room for two adapters and Weather Station has room for ten (adapters mount inside station enclosure)
Represents one data input channel
The S-VIA-CM14 sensor supports the following measurement: DC Voltage
Measurement range: 0-5 V DC
Accuracy: ±10mV ±0.3% of reading (over operating temperature range)
Resolution: ±1.221 millivolts
Input impedance: 1 Megohms
Sensor trigger open collector: Maximum sink current: 115 mA; 30V maximum
Sensor trigger source: Voltage: 2.5 V ±2.4%; maximum current: 1 mA
Trigger Timing
Warm-up time: 10.3 ms ±3% (fixed)
Measurement time: 2.4 ms ±3%
Cable length: 14 cm (5.5 inch)
Ground connection: Same for adapters and PC interface
- The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
Specifications
No published specifications for this product.
Documents
PDF · 473 kB
PDF · 59 kB
Related products
LI-COR (HOBO, InTemp, LI-COR) · U30-NRC
HOBO U30 USB Weather Station Data Logger
This rugged weather station is Onset’s most durable outdoor environmental monitoring solution. Users can easily configure the HOBO U30-NRC Weather Station to fit their application needs. Use up to 15 channels to collect environmental data and then upload to…
LI-COR (HOBO, InTemp, LI-COR) · H22-001
Registrador de Datos HOBO H22 de energía (hasta 15 canales)
LI-COR (HOBO, InTemp, LI-COR) · S-CIA-CM14
12-bit 4-20mA Input Adapter Sensor
The 12-bit 4-20 mA Input Adapter interfaces with any sensor providing a 4-20 mA signal to connect to smart sensor compatible HOBO stations. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external…
What do you need to measure?
Tell EIC Controls about your application.