Brand
Agricultural Research · Environmental Research · Energy · Weather
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-150
The Magnelab AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated voltage).…
LI-COR (HOBO, InTemp, LI-COR) · 2222SB
15 m and 30 m cable with BNC connectors for LI-190R, LI-200R, LI-210R and other SA- or BNC-type sensors.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-015
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-W-015
Provides the connection between the HOBO MX802 logger and a Conductivity sensor or CTD sensor. - Includes strain relief and Kevlar strength member for suspending sensors in a constant position - Easy to attach or change
LI-COR (HOBO, InTemp, LI-COR) · CX400-21-19684-02
Compatible with the CX402 series data loggers (all 3 models - CX402-VFC, CX402-XXM, and CX402TXXX), these bottles are used to dampen thermal response times (rate of temperature change) to help prevent “nuisance” / false alarms from occurring when activities…
LI-COR (HOBO, InTemp, LI-COR) · 180-07
16 GB SD card for data storage in the LI-180 Spectrometer.
LI-COR (HOBO, InTemp, LI-COR) · CTV-A
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · W-ADAPT-2
Connects any two sensors to one Bluetooth MX801 or MX802 logger
LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-2.0
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-W-2.0
Provides the connection between the HOBO MX802 logger and a Conductivity sensor or CTD sensor. - Includes strain relief and Kevlar strength member for suspending sensors in a constant position - Easy to attach or change
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-020
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-20
A small 20 AMP split-core AC Current Transformer (CT) mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and with…
LI-COR (HOBO, InTemp, LI-COR) · 6581-044
Soil Collar, 8 inches (approx 20 cm) in diameter. For use with 8100-103 Survey Chamber, 8100-101 and 8100-104(C) Long-Term Chambers, 8200-104 Long-Term Chambers, and 8200-01S Smart Chamber.
LI-COR (HOBO, InTemp, LI-COR) · CTV-D
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SCT-200
The Magnelab AC Current 200 Amp AC Current Transformer or CT (Magnelab part SCT-1250-200) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for…
LI-COR (HOBO, InTemp, LI-COR) · T-ASH-G2-200
The Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids, with an accuracy of ±1% FS from -20° to 85°C (-4° to 185°F) and only ±1.5% FS -40° to -20°C and 85° to 125°C…
LI-COR (HOBO, InTemp, LI-COR) · 2003S
Accessory for deployment of the 190R and 200R LI-COR light sensors and MX2308 Temp/RH logger with external PAR Sensor.
LI-COR (HOBO, InTemp, LI-COR) · 2420-BL
The 2420 Light Sensor Amplifier converts the μA current from a light sensor into a voltage that can be measured by most data loggers and system controllers. The 2420 Amplifier provides 15 user-selectable gain settings to accommodate a variety of applications.…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-250
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · 301-10382
Mesh Filter Screen; 250 Mesh SS; Used with LI-7200/RS Flow Module
LI-COR (HOBO, InTemp, LI-COR) · CX402-B2M
InTemp CX402-xxM (with Probe only) data loggers monitor temperatures in refrigerators, freezers, and other temperature-controlled environments to comply with global GDP requirements. The loggers communicate wirelessly via Bluetooth to mobile devices. Using…
LI-COR (HOBO, InTemp, LI-COR) · 9982-011
Smart Chamber to LI-COR Trace Gas Analyzer Backpack Cable Assembly; Sealed, water-resistant RJ45 ethernet cable/tubing bundle (2 m) for use with the Smart Chamber (8200-01S) and LI-COR Trace Gas Analyzer
LI-COR (HOBO, InTemp, LI-COR) · CX402-T215
InTemp CX402-Txxx (with Glycol Bottle) data loggers monitor temperatures in refrigerators, freezers and other temperature-controlled environments to comply with global GDP requirements. The loggers communicate wirelessly via Bluetooth to mobile devices. Using…
LI-COR (HOBO, InTemp, LI-COR) · CX402-T230
InTemp CX402-Txxx (with Glycol Bottle) data loggers monitor temperatures in refrigerators, freezers and other temperature-controlled environments to comply with global GDP requirements. The loggers communicate wirelessly via Bluetooth to mobile devices. Using…
Tell EIC Controls about your application.