LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-100
100 Amp Accu-CT Split-Core Current Transformer 333mV Sensor
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Applications
Energy
Filters
Brand
Measurements
LI-COR (HOBO, InTemp, LI-COR) · S-VIA-CM14
12-bit Voltage Input Adapter Sensor
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-020
20 Amp Accu-CT Split-Core Current Transformer 333mV Sensor
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-250
250 Amp Accu-CT Split-Core Current Transformer 333mV Sensor
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Marca por confirmar · 280-SP
280-SP Series Silicon Cell Pyranometers
The 280-SP Series Silicon Cell Pyranometers are excellent for applications that do not require the higher accuracy and cost of a thermopile pyranometer. They are less expensive and have faster response times, but have higher errors under cloudy conditions.…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-300
300 Volt AC Potential Transformer Sensor
The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-050
50 Amp Accu-CT Split-Core Current Transformer 333mV Sensor
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-600
600 Volt AC Potential Transformer Sensor
The Magnelab 600-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…
LI-COR (HOBO, InTemp, LI-COR) · S-UCC-M006
Adaptador de entrada de pulso (Electronic Switch Pulse Input Adapter - 6 meter Sensor
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a…
LI-COR (HOBO, InTemp, LI-COR) · T-DCI-F350-W5x3
Air Velocity & Temperature Remote Head Sensor
The F350 series is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics. In products where segregation of the sensing element and electronics is desirable, such as…
Aranet · TDSPIC01.010
Aranet Pulse Counter sensor
Designed for pulse output monitoring, Aranet Pulse Counter sensor counts the times that a mechanical contact closes. The applications include electricity meters and water flow monitoring. Both count-per-measurement interval and the cumulative count are…
LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5200-10S
Compressed Air Flow Meter - 1-80 SCFM Sensor
The T-CDI-5200-10S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…
LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5400-20S
Compressed Air Flow Meter - 40-600 SCFM Sensor
The T-CDI-5400-20S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…
LI-COR (HOBO, InTemp, LI-COR) · S-UCD-M001
Contact Closure Pulse Input Adapter - 1 meter Sensor
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of…
LI-COR (HOBO, InTemp, LI-COR) · S-UCD-M006
Contact Closure Pulse Input Adapter - 6 meters Sensor
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of…
LI-COR (HOBO, InTemp, LI-COR) · T-VER-E50B2
E50B2 Power & Energy Meter Sensor
Build better energy efficiency and power management with the E50B2 Power & Energy Meter. This cost-effective sensor is simple to deploy and can either be installed on standard DIN rail or be surface mounted. The E50B2 integrates with HOBO UX, U30, ZW, H22,…
LI-COR (HOBO, InTemp, LI-COR) · EG4115
EG4115 Core - 15 Input Meter Data Logger
The EG4115 Core is a 15-channel energy meter with 0.5% revenue-grade accuracy compliance and the ability to measure residential or commercial circuit panels, up to 3-phase 277/480VAC and 6900A. The meter has HomePlug AV powerline communication, an Ethernet…
LI-COR (HOBO, InTemp, LI-COR) · EG4130
EG4130 Core - 30 Input Meter Data Logger
The EG4130 Core is a 30-channel energy meter with 0.5% revenue-grade accuracy compliance and the ability to measure residential or commercial circuit panels, up to 3-phase 277/480VAC and 6900A. The meter has HomePlug AV powerline communication, an Ethernet…
Marca por confirmar · EIC28312-1
EIC28312-1 Weighing Controller
EIC28312-1 can be connected with load cell or other force transducer directly, with fast response, high precision, stable measurement, tare weight, display correction and other adjustment functions. It has 6-channel switch control for start/stop, fast…
LI-COR (HOBO, InTemp, LI-COR) · S-UCC-M001
Electronic Switch Pulse Input Adapter - 1m Sensor
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a…
LI-COR (HOBO, InTemp, LI-COR) · S-FS-TRMSA-D
FlexSmart TRMS Module (2 channels) w/modular plug Sensor
The 15-bit two-channel FlexSmart True RMS Current / Voltage Module accepts an input range of 5mV to 512mV and is compatible with 333mV FS output sensors. Field wiring is 2-wire via screw terminals. NOTE: If using the S‐FS‐TRMSA‐D with a U30‐GSM or…
LI-COR (HOBO, InTemp, LI-COR) · U12-008
HOBO 4-Channel External Data Logger
Employ multiple energy and environmental sensors, ranging from amps to temperature, with the HOBO U12-008 data logger. Its weatherproof enclosure allows the U12-008 to be flexible to deploy inside or outdoors. The HOBO U12-008 memory stores 43,000…
LI-COR (HOBO, InTemp, LI-COR) · UX120-017
HOBO 4-Channel Pulse Data Logger
The HOBO UX120 Pulse Data Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals – from energy auditors to building…
LI-COR (HOBO, InTemp, LI-COR) · UX120-017M
HOBO 4-Channel Pulse Data Logger (500.000 measurements)
The HOBO UX120 Pulse Data Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals – from energy auditors to building…
What do you need to measure?
Tell EIC Controls about your application.