Applications
LI-COR (HOBO, InTemp, LI-COR) · CTV-C
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-100
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SCT-100
The Magnelab AC Current 100 Amp AC Current Transformer or CT (Magnelab part SCT-1250-100) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for…
LI-COR (HOBO, InTemp, LI-COR) · S-VIA-CM14
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-150
The Magnelab AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated voltage).…
LI-COR (HOBO, InTemp, LI-COR) · CTV-A
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-020
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-20
A small 20 AMP split-core AC Current Transformer (CT) mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and with…
LI-COR (HOBO, InTemp, LI-COR) · CTV-D
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SCT-200
The Magnelab AC Current 200 Amp AC Current Transformer or CT (Magnelab part SCT-1250-200) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-250
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Marca por confirmar · 280-SP
The 280-SP Series Silicon Cell Pyranometers are excellent for applications that do not require the higher accuracy and cost of a thermopile pyranometer. They are less expensive and have faster response times, but have higher errors under cloudy conditions.…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-300
The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-05
A small 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and…
LI-COR (HOBO, InTemp, LI-COR) · CTV-B
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-050
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-50
A small 50 AMP split-core AC Current Transformer (CT) mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and with…
LI-COR (HOBO, InTemp, LI-COR) · CTV-E
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SCT-600
The Magnelab AC Current 600 Amp AC Current Transformer or CT (Magnelab part SCT-2000-600) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-600
The Magnelab 600-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-75
A small 50 AMP split-core AC Current Transformer (CT) mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and with…
LI-COR (HOBO, InTemp, LI-COR) · S-UCC-M006
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a…
LI-COR (HOBO, InTemp, LI-COR) · T-DCI-F350-W5x3
The F350 series is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics. In products where segregation of the sensing element and electronics is desirable, such as…
Aranet · TDSPIC01.010
Designed for pulse output monitoring, Aranet Pulse Counter sensor counts the times that a mechanical contact closes. The applications include electricity meters and water flow monitoring. Both count-per-measurement interval and the cumulative count are…
Tell EIC Controls about your application.