Measurements
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-15
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-2
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-50
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-5
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · 7900-170
Soil Moisture and Temperature Probe, 15 m cable
LI-COR (HOBO, InTemp, LI-COR) · 8150-203
For use with multiplexed 8100-101 or 8100-104 Long-Term Chambers only. It connects directly to the 8100-104 Long-Term Chamber. Requires 8150-661 Chamber Sensor Interface to use with the 8100-101 Long-Term Chamber.
LI-COR (HOBO, InTemp, LI-COR) · 900-19016
Soil moisture, temperature, and electrical conductivity probe with SDI-12 connection cable to connect to the 8200-01S, 8200-104/C and 6800-09 chambers. Features a 1-meter cable and weather-resistant M12 connector.
LI-COR (HOBO, InTemp, LI-COR) · TCM-1
Measures water velocity at high and low current ranges Simply designed with a lower cost, the TCM-1 tilt current meter is ideal for measuring water velocity at multiple locations, from inland to the edge of the continental shelf. Important Information…
LI-COR (HOBO, InTemp, LI-COR) · TCM-4
Measures water velocity in shallow water environments Able to operate in less than one foot of water with no external sensors or floats, the TCM-4 Tilt Current Meter is ideal for measuring water velocity in shallow water environments like coastal ponds, bays,…
LI-COR (HOBO, InTemp, LI-COR) · LI-192SA
Used for underwater or atmospheric PPFD measurements up to 5500kPa, 560 meters depth. Underwater or atmospheric Photosynthetic Photon Flux Density (PPFD) can be accurately measured using the LI-192SA Underwater Quantum Sensor. The LI-192SA is cosine corrected…
LI-COR (HOBO, InTemp, LI-COR) · MX2001-04-Ti-S
For use with HOBO MX2001 Bluetooth water level loggers, HOBO MicroRX Water Level Stations (RX2103 and RX2104), the HOBO RX3000 Remote Monitoring Station, and the HOBOnet Remote Water Level Monitoring System, for accurate water pressure, temperature, and water…
LI-COR (HOBO, InTemp, LI-COR) · MX2001-01-Ti-S
For use with HOBO MX2001 Bluetooth water level loggers, HOBO MicroRX Water Level Stations (RX2103 and RX2104), the HOBO RX3000 Remote Monitoring Station, and the HOBOnet Remote Water Level Monitoring System, for accurate water pressure, temperature, and water…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP10
The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-2.5-STEREO
An external input cable with 13mm tinned braided wire leads. Voltage input specifications vary with attached data logger.Overall length of this cable is 1.8m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP24
The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP5
The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · S-RGA-M002
Measures rainfall with intensity up to five inches per hour with a resolution of 0.01 inch, and 1% accuracy for rainfall rates up to 1"/hour. The tipping bucket mechanism is mounted on a stainless-steel shaft with brass bearings. This model includes a 2m…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-100
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-020
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-250
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · CX402-B2M
InTemp CX402-xxM (with Probe only) data loggers monitor temperatures in refrigerators, freezers, and other temperature-controlled environments to comply with global GDP requirements. The loggers communicate wirelessly via Bluetooth to mobile devices. Using…
LI-COR (HOBO, InTemp, LI-COR) · CX402-T215
InTemp CX402-Txxx (with Glycol Bottle) data loggers monitor temperatures in refrigerators, freezers and other temperature-controlled environments to comply with global GDP requirements. The loggers communicate wirelessly via Bluetooth to mobile devices. Using…
LI-COR (HOBO, InTemp, LI-COR) · CX402-T230
InTemp CX402-Txxx (with Glycol Bottle) data loggers monitor temperatures in refrigerators, freezers and other temperature-controlled environments to comply with global GDP requirements. The loggers communicate wirelessly via Bluetooth to mobile devices. Using…
Tell EIC Controls about your application.