Measurements
LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5200-10S
The T-CDI-5200-10S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…
LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5400-20S
The T-CDI-5400-20S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…
Marca por confirmar · EIC-2890
EIC-2890 portable single gas detector can make continuous detection to combustible and toxic gases.
Marca por confirmar · RSF/E
-30...+75°C PT100, PT1000, Ni, NTC, KTY aluminium globe
DeltaOhm - GHM Group · LPUVA01
Probe for measuring irradiance in the UVA (315 nm ... 400 nm) spectral range
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP10
The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-2.5-STEREO
An external input cable with 13mm tinned braided wire leads. Voltage input specifications vary with attached data logger.Overall length of this cable is 1.8m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP24
The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP5
The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-100
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-020
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-250
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-300
The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-4-20mA
Cable for connecting a sensor with a 4-20mA output to a HOBO U12, UX120, or ZW series external-channel data logger
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-050
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-600
The Magnelab 600-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated…
Marca por confirmar · EIC-2860
EIC-2860 fixed gas detector adopts advanced catalytic gas sensor or electrochemical sensor, which can translate the gas concentration in the air to the digital signal output. The detector working with gas controller can be used to detect gas in refinery,…
LI-COR (HOBO, InTemp, LI-COR) · S-FS-TRMSA-D
The 15-bit two-channel FlexSmart True RMS Current / Voltage Module accepts an input range of 5mV to 512mV and is compatible with 333mV FS output sensors. Field wiring is 2-wire via screw terminals. NOTE: If using the S‐FS‐TRMSA‐D with a U30‐GSM or…
LI-COR (HOBO, InTemp, LI-COR) · UX90-002M
The HOBO Light On/Off data logger monitors indoor light changes with an internal sensor and records light on and off conditions, making it ideal for building energy audits and light usage analysis. The HOBO UX90-002 Light On/Off Data Logger is available in a…
LI-COR (HOBO, InTemp, LI-COR) · UX90-002
The HOBO Light On/Off data logger monitors indoor light changes with an internal sensor and records light on and off conditions, making it ideal for building energy audits and light usage analysis. The HOBO UX90-002 Light On/Off Data Logger is available in a…
LI-COR (HOBO, InTemp, LI-COR) · SD-CT-xxx
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this split-core AC current transformer offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
Marca por confirmar · IAQFW/xxxxx
IAQW/IAQD are specially designed to detect various air pollutants (VOCs) in the air content including wood, paint and others produced by toluene, cigarette, ammonia odor, CO, alcohol, natural gas and even body odor. While IAQFW/IAQFD are specific only for…
LI-COR (HOBO, InTemp, LI-COR) · KIT-UX90-KWH
The HOBO kWh Monitoring Kit combines the convenience and affordability of Onset’s award-winning HOBO UX90 State/Pulse Data Logger with the power of industry-leading WattNode sensors. As one of the industry’s lowest-cost kWh monitoring solutions, the kit gives…
LI-COR (HOBO, InTemp, LI-COR) · UX90-002-B
The HOBO Light On/Off data logger monitors indoor light changes with an internal sensor and records light on and off conditions, making it ideal for building energy audits and light usage analysis. Includes ABS enclosure with transparent cover. Dimensions of…
Tell EIC Controls about your application.