Measurements
LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5200-10S
The T-CDI-5200-10S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…
LI-COR (HOBO, InTemp, LI-COR) · T-CDI-5400-20S
The T-CDI-5400-20S is a flow meter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This…
Marca por confirmar · EIC-2890
EIC-2890 portable single gas detector can make continuous detection to combustible and toxic gases.
Marca por confirmar · RSF/E
-30...+75°C PT100, PT1000, Ni, NTC, KTY aluminium globe
LI-COR (HOBO, InTemp, LI-COR) · MX-AIRP
Temperature is one of the most critical and commonly measured parameters across the entire range of HVAC systems. Specifically, air-handling units and large spaces require diagnostics to gauge temperature stratification by capturing key temperature points…
LI-COR (HOBO, InTemp, LI-COR) · MX-HVAC
Ideal for analyzing the operation performance of commercial HVAC systems and identifying opportunities to improve energy efficiency, this set of products includes a Bluetooth data logger, three temperature probes, and one AC current sensor—an easy-to-deploy,…
LI-COR (HOBO, InTemp, LI-COR) · S-RTA-M006
The RX Runtime Smart Sensor measures the percent ON of any AC-powered device with an AC current switch, and time ON (closed) of contact closures - ideal for equipment runtime monitoring, boiler efficiency monitoring, pump monitoring, and engine monitoring.…
LI-COR (HOBO, InTemp, LI-COR) · T-DCI-F350-W5x3
The F350 series is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics. In products where segregation of the sensing element and electronics is desirable, such as…
LI-COR (HOBO, InTemp, LI-COR) · CSV-A8
Measure runtime (time-of-use) of equipment with the CSV-A8 split-core AC current sensor along with a compatible HOBO data logger. This UL-listed sensor has built-in on/off status lights and provides an adjustable current threshold of 0.5 to 175 amps. Simply…
Marca por confirmar · EIC28312-1
EIC28312-1 can be connected with load cell or other force transducer directly, with fast response, high precision, stable measurement, tare weight, display correction and other adjustment functions. It has 6-channel switch control for start/stop, fast…
Marca por confirmar · EIC9819
Air Velocity and Temperature Meter with LCD Display Applications: HVAC installation, repair, diagnostics and optimisation. Installation, maintenance and analysis of ventilation systems. Wind and ambient temperature analysis. Boiler rooms. Automotive…
LI-COR (HOBO, InTemp, LI-COR) · UX90-LIGHT-PIPE-1
The Light Pipe, a 1-foot attachment for HOBO UX90 Occupancy & Light data loggers, helps eliminate the effects of ambient sunlight when monitoring room light usage.
LI-COR (HOBO, InTemp, LI-COR) · UX90-004M
The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical dry contact closures from external sensing devices. This data logger is ideal for tracking the usage & runtimes of…
LI-COR (HOBO, InTemp, LI-COR) · UX90-004
The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical dry contact closures from external sensing devices. This data logger is ideal for tracking the usage & runtimes of…
LI-COR (HOBO, InTemp, LI-COR) · UX90-006M
The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage and potential savings. The HOBO UX90-006 Room Occupancy/Light Data Logger is available in a standard 128 KB…
LI-COR (HOBO, InTemp, LI-COR) · UX90-006
The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage and potential savings. The HOBO UX90-006 Room Occupancy/Light Data Logger is available in a standard 128 KB…
LI-COR (HOBO, InTemp, LI-COR) · UX90-005M
The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage and potential savings. The HOBO UX90-005 Room Occupancy/Light Data Logger is available in a standard 128 KB…
LI-COR (HOBO, InTemp, LI-COR) · UX90-005
The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage and potential savings. The HOBO UX90-005 Room Occupancy/Light Data Logger is available in a standard 128 KB…
LI-COR (HOBO, InTemp, LI-COR) · S-UCC-M006
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a…
LI-COR (HOBO, InTemp, LI-COR) · S-UCD-M001
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of…
LI-COR (HOBO, InTemp, LI-COR) · S-UCD-M006
The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of…
LI-COR (HOBO, InTemp, LI-COR) · S-UCC-M001
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a…
Marca por confirmar · FU2200A
FU2200A digital Ethernet power meter with data logger is a three-phase multifunction power and energy meter manufactured by GFUVE. It provides excellent value for monitoring power and energy management systems. It may be used as data gathering devices for…
LI-COR (HOBO, InTemp, LI-COR) · T-MINOL-130-NL
Measure cold and hot water flow rates with this compact, affordable water meter. The small-sized T-MINOL-130-NL is designed for deployment in apartments, assisted living communities, and other commercial buildings. Please note, the T-MINOL is configured for…
Tell EIC Controls about your application.