Current/Voltage

FlexSmart TRMS Module (2 channels) w/modular plug Sensor

Reference
S-FS-TRMSA-D

Price on request

The 15-bit two-channel FlexSmart True RMS Current / Voltage Module accepts an input range of 5mV to 512mV and is compatible with 333mV FS output sensors. Field wiring is 2-wire via screw terminals.

NOTE: If using the S‐FS‐TRMSA‐D with a U30‐GSM or RX3003-00-01, the S‐FS‐TRMSA‐D should be located approximately 1 meter (3 ft) from the U30 in order to avoid interference from the U30's GSM radio. Use Smart Sensor extension cable Onset part # S‐EXT‐M002.

Talk to a specialist

Overview

Highlighted Features

2 input channels of AC Current and/or Voltage
Measures True RMS for accurate readings of sinusoidal and non-sinusoidal waveforms

The S-FS-TRMSA-D sensor supports the following measurements: AC Current and AC Voltage

Input channels: 2
Range: 5mV to 512mV input; compatible with 333mV FS output sensors
Maximum input: ±1V
Minimum input: 5mV
Accuracy: ±0.3% of reading ±0.5% FSR*
Resolution: 15-bit
Field wiring: 2-wire via screw terminals
Dimensions: 3.5cm x 5.7cm x 1.9cm (1.38 in. x 2.25 in. x 0.75 in.)
Cable length: 17.8 cm (7 in.)
Weight: 21.2g (0.75oz)

  • Crest factor may cause additional error

Related products

HOBO U30 USB Weather Station Data Logger

LI-COR (HOBO, InTemp, LI-COR) · U30-NRC

HOBO U30 USB Weather Station Data Logger

This rugged weather station is Onset’s most durable outdoor environmental monitoring solution. Users can easily configure the HOBO U30-NRC Weather Station to fit their application needs. Use up to 15 channels to collect environmental data and then upload to…

View product

What do you need to measure?

Tell EIC Controls about your application.