pHionics 0-100,000 µS/cm Conductivity & Temperature Sensor

The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data.  These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes with analog inputs. A narrow diameter allows the STs Series to go places others can’t, while the chemical-resistant housing ensures the sensor endures for many years.  Proprietary electrode technology provides stable measurements to reduce calibration frequency.   All parts, including the cable, are easily replaceable without tools In addition, isolation, differential amplification, and shielding ensureaccurate and low-noise measurements, all while remaining low-power.These features make this conductivity sensor well-suited for applications such as groundwater monitoring, wastewater treatment, aquaculture, pollution monitoring, etc.Noise Reduction Technology

Image

• 4-cell electrode to measure conductivity (Specific Conductance), or TDS, depending on scalingModels available for 5 different conductivity rangesSecondary 0-50°C temperature sensor Chemical-resistant PVDF and 316 Stainless Steel housing (Titanium optional) Metal housing acts as the solution ground, removing background noise caused by stray electrical currentsNarrow diameter (0.75 inches or 1.9 cm) Electrode guard to reduce debris or algae buildup and protect from damage Fully submersible up to 70 psi Shielded, Kevlar®-reinforced, water-blocked polyurethane cable 4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge)Automatic Temperature Compensation (2% per degree Celsius) Reversed Input Protection and Operation Built-in electrical isolation to prevent ground loops Signal conditioning to remove background noise