Price on request
Measures up to 200 Amps of DC current in both flow directions.
Requirements for use with specific data loggers:
HOBO MX1100 series: a 4-20mA input cable (SD-MA-420) and external power provided by an AC adapter (AC-SENS-1)
HOBO U12, UX120-006M, or ZW series: a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1)
HOBO RX3000: an analog input module (RXMOD-A1)
HOBO U30: an analog input module (VIA)
HOBO H22: an analog input module (S-FS-CVIA)
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
Measures up to 200 Amps of DC current in both flow directions.
Requirements for use with specific data loggers:
HOBO MX1100 series: a 4-20mA input cable (SD-MA-420) and external power provided by an AC adapter (AC-SENS-1)
HOBO U12, UX120-006M, or ZW series: a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1)
HOBO RX3000: an analog input module (RXMOD-A1)
HOBO U30: an analog input module (VIA)
HOBO H22: an analog input module (S-FS-CVIA)
| Property | Value |
|---|---|
| Categoria Onset | Sensors |
| Medições | DC Current |
| Ambientes | Indoor |
| País de origem | United States |
No published documents for this product.
No linked applications.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-05
A small 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and…
Marca por confirmar · SC28T010T-D
Features: 5V DC output, split core current transformer. Core Material: Ferrite Working voltage: 720V Operating temperature:-25℃～+60℃ Storage temperature: -30 ° c ~ + 90 ° c Frequency range: 50Hz～60Hz Dielectric strength: 3.5 KV 50Hz 1min
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-300
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · T-EG-0390-0050
Split-core CTs from J&D Sensing offer a well-constructed hinged body and are accurate to +/-1% from 1%-100% of their stated current rating. The small interval for physical size options (10mm/0.39", 24mm/0.94", and 36mm/1.42") allow for a flexible…
Tell EIC Controls about your application.