Price on request
Provides accurate kWh measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter or a HOBO Data Node pulse input port to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should only be used by qualified personnel. This model supports up to 3 separate 120 VAC single-phase branch circuits or individual 120 VAC phases of a 3-phase wye-connection 208/240 VAC circuit.
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
Provides accurate kWh measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter or a HOBO Data Node pulse input port to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should only be used by qualified personnel. This model supports up to 3 separate 120 VAC single-phase branch circuits or individual 120 VAC phases of a 3-phase wye-connection 208/240 VAC circuit.
| Property | Value |
|---|---|
| Categoria Onset | Sensors |
| Medições | Kilowatt Hours (kWh) |
| Ambientes | Indoor |
| País de origem | United States |
No published documents for this product.
No linked applications.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-05
A small 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and…
Marca por confirmar · SC28T010T-D
Features: 5V DC output, split core current transformer. Core Material: Ferrite Working voltage: 720V Operating temperature:-25℃～+60℃ Storage temperature: -30 ° c ~ + 90 ° c Frequency range: 50Hz～60Hz Dielectric strength: 3.5 KV 50Hz 1min
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-300
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · T-VER-971BP-200
Measures up to 200 Amps of DC current in both flow directions. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA input cable (SD-MA-420) and external power provided by an AC adapter (AC-SENS-1) HOBO U12, UX120-006M, or ZW series: a…
Tell EIC Controls about your application.