EIC Controls
WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor

Current/Voltage

WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor

Reference
T-WNB-3D-480

Price on request

Provides accurate measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode Delta or Wye-connection kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should only be used by qualified personnel. This model supports a 3-phase Delta-connection of 480 VAC.

  • Measures 1, 2, or 3 phases in 2, 3, or 4 wire configurations
  • Use with wide choice of CTs (sold separately); ratings from 5 to 1500 amps
  • Accurate measurement of 1-,2-, or 3-phase configurations
  • Easy to install and wire
  • Pulse output: compatible with pulse input logger models
  • Small size: can be installed in existing service panels or junction boxes
  • Diagnostic LEDs: confirms proper installation for all phases
  • Bidirectional metering: net metering for PV (photovoltaic) solar and wind power generation with only one meter
  • Metering of variable frequency drives
  • Line powered: no external supply required
  • Detachable terminal blocks: easy to install and remove.
  • UL, cUL listed: designed and tested for safety and use throughout North America
  • CE Mark: can be installed throughout the EU
  • Categoria Onset Sensors
  • Medições Kilowatt Hours (kWh)
  • Ambientes Indoor
  • País de origem United States
Talk to a specialist

Overview

Provides accurate measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode Delta or Wye-connection kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should only be used by qualified personnel. This model supports a 3-phase Delta-connection of 480 VAC.

  • Measures 1, 2, or 3 phases in 2, 3, or 4 wire configurations
  • Use with wide choice of CTs (sold separately); ratings from 5 to 1500 amps
  • Accurate measurement of 1-,2-, or 3-phase configurations
  • Easy to install and wire
  • Pulse output: compatible with pulse input logger models
  • Small size: can be installed in existing service panels or junction boxes
  • Diagnostic LEDs: confirms proper installation for all phases
  • Bidirectional metering: net metering for PV (photovoltaic) solar and wind power generation with only one meter
  • Metering of variable frequency drives
  • Line powered: no external supply required
  • Detachable terminal blocks: easy to install and remove.
  • UL, cUL listed: designed and tested for safety and use throughout North America
  • CE Mark: can be installed throughout the EU

Related products

5 AMP Mini Split-core AC Current Transformer Sensor

LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-05

5 AMP Mini Split-core AC Current Transformer Sensor

A small 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and…

View product

0-300 Volt AC Transmitter Sensor

LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-300

0-300 Volt AC Transmitter Sensor

The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…

View product

Split-Core DC Transducer Sensor

LI-COR (HOBO, InTemp, LI-COR) · T-VER-971BP-200

Split-Core DC Transducer Sensor

Measures up to 200 Amps of DC current in both flow directions. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA input cable (SD-MA-420) and external power provided by an AC adapter (AC-SENS-1) HOBO U12, UX120-006M, or ZW series: a…

View product

What do you need to measure?

Tell EIC Controls about your application.

Talk to a specialistContact