Price on request
The Magnelab AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated voltage). Because these transformers tie directly into the line, they should only be used by qualified personnel.
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
The Magnelab AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated voltage). Because these transformers tie directly into the line, they should only be used by qualified personnel.
| Property | Value |
|---|---|
| Categoria Onset | Sensors |
| Medições | AC Voltage |
| Ambientes | Indoor |
| País de origem | United States |
No published documents for this product.
No linked applications.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-05
A small 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and…
Marca por confirmar · SC28T010T-D
Features: 5V DC output, split core current transformer. Core Material: Ferrite Working voltage: 720V Operating temperature:-25℃～+60℃ Storage temperature: -30 ° c ~ + 90 ° c Frequency range: 50Hz～60Hz Dielectric strength: 3.5 KV 50Hz 1min
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-300
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · T-VER-971BP-200
Measures up to 200 Amps of DC current in both flow directions. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA input cable (SD-MA-420) and external power provided by an AC adapter (AC-SENS-1) HOBO U12, UX120-006M, or ZW series: a…
Tell EIC Controls about your application.