Price on request
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
Unprecedented Linearity
Window Opening 0.75 Inch
The Accu-CT revenue grade, split-core current transformer offers outstanding linearity and phase angle accuracy with a unique one-handed opening and closing mechanism.
Safe: burden resistor built-in, 333 mVac voltage output at rated full scale current, no shorting blocks needed
IEEE C57.13 and IEC 60044-1 accuracy: over full temperature range and down to 1% of rated current
Exceptionally low phase angle error: essential for accurate power and energy measurements
Glove-friendly: easy to open and install with one hand while wearing safety gloves
Approvals: UL recognized, CE mark, RoHS
The T-ACT-0750-020 sensor supports the following measurements: AC Current and Amps (A)
Accuracy: ±0.75% from 1% to 120% of rated primary current
Phase angle: ±0.5 degrees (30 minutes) from 1% to 120% of rated current
Accuracy standards: IEEE C57.13 class 1.2 and IEC 60044-1 class 1.0
Primary rating: 5 to 250 Amps, 600 Vac, 60 Hz nominal
Output: 333.33 mVac at rated current
Operating temperature: -30°C to 55°C
Safe: integral burden resistor, no shorting block needed, unlessotherwise noted
Standard lead length: 8 ft (2.4 m), 18 AWG
UL recognized, CE mark, RoHS
Assembled in USA: qualified under Buy American provision in ARRA of 2009
Width: 2.38 inches
Height: 2.40 inches
Thickness: 0.90 inches
Window: 0.78 inches
No published specifications for this product.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-05
A small 5 AMP split-core AC Current Transformer (CT) is mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and…
Marca por confirmar · SC28T010T-D
Features: 5V DC output, split core current transformer. Core Material: Ferrite Working voltage: 720V Operating temperature:-25℃～+60℃ Storage temperature: -30 ° c ~ + 90 ° c Frequency range: 50Hz～60Hz Dielectric strength: 3.5 KV 50Hz 1min
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-300
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · T-VER-971BP-200
Measures up to 200 Amps of DC current in both flow directions. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA input cable (SD-MA-420) and external power provided by an AC adapter (AC-SENS-1) HOBO U12, UX120-006M, or ZW series: a…
Tell EIC Controls about your application.