Products
Data Loggers and Sensors for monitoring indoor, outdoor and aquatic environments.
LI-COR (HOBO, InTemp, LI-COR) · RXW-UCC-868
Compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals. A complete system requires at least one HOBO RX3000 Remote Monitoring Station, a HOBOnet Wireless Manager (RXMOD-RXW-xxx), and a HOBOnet Wireless…
LI-COR (HOBO, InTemp, LI-COR) · S-WCC-M003
The S-WCC-M003 adapter connects the R.M. Young Marine Wind Monitor Sensor (model 05106) with Onset's line of research-grade weather stations, including the HOBO U30 Remote Monitoring System, H21, and H22 weather station and energy monitoring systems. The R.M.…
LI-COR (HOBO, InTemp, LI-COR) · S-WCE-M003
The S-WCE-M003 adapter connects the R.M. Young Wind Monitor Sensor (model 05103) with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems.
LI-COR (HOBO, InTemp, LI-COR) · S-WCB-M003
The S-WCB-M003 adapter connects the R.M. Young Wind Monitor-AQ Sensor (model 05305) with Onset's line of research-grade weather stations, including the HOBO U30 Remote Monitoring System, H21, and H22 weather station and energy monitoring systems. The R.M.…
Pronamic · RAIN-O-MATIC
Rain-O-Matic Small rain sensor with our patented unique single spoon tipping bucket is a reliable low cost high quality rain gauge ideal for small weather stations, irrigation/soil moisture management and drain water measurement in drip irrigation.
LI-COR (HOBO, InTemp, LI-COR) · S-RGB-M002
This Rain Gauge Smart Sensor measures rainfall with a resolution of .2 mm, and 1% accuracy for rainfall rates up to 12.7 cm. The tipping bucket mechanism is mounted on a stainless steel shaft with brass bearings. This model includes a 2m cable. Also available…
Marca por confirmar · SRH1A
Sensor SRH1A offers ± 1.8% RH (at 25°C) and ± 0,2°C temp accuracy which places it among high quality products for high-standard meteorology use as well as environmental and industry measurements. The use of digital SDI-12 interface protocol makes the sensor…
LI-COR (HOBO, InTemp, LI-COR) · RX2105
The compact HOBO MicroRX Station is an easy-to-deploy, low-cost cellular solution for long-term, reliable monitoring of indoor conditions in warehouses, cold storage facilities, data centers, museums, commercial and residential buildings, and more. The…
LI-COR (HOBO, InTemp, LI-COR) · RXMOD-W1
The RX3000 Water Level Sensor Module (RXMOD-W1) offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure with the HOBO RX3000 Remote Monitoring Station. It is configured through HOBOlink, Onset’s cloud-based…
LI-COR (HOBO, InTemp, LI-COR) · RXW-ANA-868
Connects 3rd Party sensors to HOBOnet remote monitoring system Expand the versatility of your HOBOnet remote monitoring system with this analog mote, featuring four analog inputs that seamlessly integrate your preferred sensors and support excitation power,…
LI-COR (HOBO, InTemp, LI-COR) · RXW-GPx-868
LI-COR (HOBO, InTemp, LI-COR) · RXW-WL-868
The HOBOnet water level sensor interface features a pre-configured, easily deployed wireless sensor that communicates accurate, reliable water level data directly to a HOBO RX3000 or HOBO MicroRX station, the core component of the HOBOnet remote monitoring…
LI-COR (HOBO, InTemp, LI-COR) · SD-TEMP-06
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
LI-COR (HOBO, InTemp, LI-COR) · SD-TEMP-50
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
LI-COR (HOBO, InTemp, LI-COR) · SD-TEMP-01
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
LI-COR (HOBO, InTemp, LI-COR) · SD-TEMP-20
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
Marca por confirmar · EIC-NPK-4-20ma
The soil nitrogen, phosphorus, and potassium three-in-one fertility sensor is suitable for detecting the content of nitrogen, phosphorus, and potassium in the soil, and determining the fertility of the soil by detecting the content of nitrogen, phosphorus,…
Marca por confirmar · EIC-NPK-RS48
The soil nitrogen, phosphorus, and potassium three-in-one fertility sensor is suitable for detecting the content of nitrogen, phosphorus, and potassium in the soil, and determining the fertility of the soil by detecting the content of nitrogen, phosphorus,…
Marca por confirmar · SSR1D
SSR1D solar radiation sensor uses photodiode as the sensing element. The device has been designed for constant outdoor use and the radiation is measured on the whole hemisphere with the full sight vision of 180°. The sensor works great in photovoltaic, food…
LI-COR (HOBO, InTemp, LI-COR) · RS3-B
Use the RS3-B Solar Radiation Shield with HOBO external sensors for improved temperature measurement accuracy in locations exposed to sunlight. The small size and unobstructed airflow of this shield provides a faster response to changing conditions than…
Tell EIC Controls about your application.