Products
Products
Data Loggers and Sensors for monitoring indoor, outdoor and aquatic environments.
Subcategories
Filters
Brand
Applications
Measurements
LI-COR (HOBO, InTemp, LI-COR) · 9982-008
Power Cable
Smart Chamber to LI-870 power; 2.5 x 5.5 mm PLUG IP68 1.2 m cable
LI-COR (HOBO, InTemp, LI-COR) · 9975-030
Power Cable
For use with the LI-7500DS/A/RS and LI-7200/RS CO2/H2O Analyzers, LI-7700 CH4 Analyzer, and the 7200-101/102 Flow Module. For the LI-7500, purchase part number 392-05619.
LI-COR (HOBO, InTemp, LI-COR) · 392-05619
POWER CABLE (LI-7500)
For use with the LI-7500 Open Path CO2/H2O Analyzer only. For the LI-7500A, purchase part number 9975-030
LI-COR (HOBO, InTemp, LI-COR) · 8150-706
Power Cable (LI-8150, LI-8250)
DC Power Cable, 3m (LI-8250, LI-8150)
LI-COR (HOBO, InTemp, LI-COR) · 591-06793
Power Supply 19V/ 72W Table Top
Power supply; 19V 72W Table-top; Used with the LI-6400/XT
LI-COR (HOBO, InTemp, LI-COR) · 9968-232
Power Supply with Power Cord
Universal power supply with cable. Used with Trace Gas Analyzers (LI-7810, LI-7815, LI-7820, and LI-7825) the LI-6800, and a variety of aquatic analyzers.
LI-COR (HOBO, InTemp, LI-COR) · WELL-KIT-P
Premium Stilling Well Deployment Kit
Streamline your stilling well deployment with this ready-to-assemble kit that includes a premium HOBO locking WELL-CAP-02 that's optimal for deploying Bluetooth wireless loggers for MicroRX stations, RXW water level sensors, and the MX2001 data logger. This…
LI-COR (HOBO, InTemp, LI-COR) · 610-01452
Protective cover
Red protective plastic cap for terrestrial sensor.
LI-COR (HOBO, InTemp, LI-COR) · 610-01451
Protective cover
Protective cover for the LI-192 Underwater Quantum Sensor
LI-COR (HOBO, InTemp, LI-COR) · CASE-4X-2
Protective enclosure
Onset's NEMA 4X weather-resistant enclosure for mounting the HOBO UX120-014M data logger in wet, dusty, or condensing environments. It is intended for short deployments where additional protection is needed. - 4 mounting brackets and screws - 2 grommet…
LI-COR (HOBO, InTemp, LI-COR) · HOUSING-1
Protective Housing for MX801 Loggers
A protective enclosure for Onset's fully submersible HOBO MX801 data logger with one sensor attached (either CTD, Conductivity, or Dissolved Oxygen sensor). - Durable PVC construction - Predrilled for good water flow to the sensors - Includes three O-rings to…
Aranet · EIC-TDSPTE06.010
PT100 EXT Wireless Sensor (-190°C to 260°C)
PT100 EXT sensors measure and monitor air, liquid and solid surface temperature. The probe can be placed in liquids or places that require close contact temperature measurements, like heating pipes or soil. Use cases include air conditioning and ventilation…
Aranet · EIC-TDSPT106.010
PT100 Wireless Transmitter/Sensor (tested range -200°C to 800°C)
Aranet PT100 Transmitter is an easy-to-use resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs). The applications include use for industrial and medical equipment, as well as instrumentation. Wireless transmitter…
LI-COR (HOBO, InTemp, LI-COR) · RXW-UCD-868
Pulse Input - Contact Closure Sensor
Compatible with contact closures, such as tipping-bucket rain gauges or reed switches. A complete system requires at least one HOBO RX3000 Remote Monitoring Station, a HOBOnet Wireless Manager (RXMOD-RXW-xxx), and a HOBOnet Wireless Sensor. HOBOnet Wireless…
LI-COR (HOBO, InTemp, LI-COR) · RXW-UCC-868
Pulse Input - Electronic Switch Sensor
Compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals. A complete system requires at least one HOBO RX3000 Remote Monitoring Station, a HOBOnet Wireless Manager (RXMOD-RXW-xxx), and a HOBOnet Wireless…
LI-COR (HOBO, InTemp, LI-COR) · 800-912
Pump Replacement Kit
Replacement air pump only. For replacing pump in previously installed 800-910 Pump Assembly Kit (LI-830 and LI-850 only). User installable.
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-15
Pyranometer BNC 15m Cable
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-2
Pyranometer BNC 2m Cable
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-50
Pyranometer BNC 50m Cable
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · LI-200R-BNC-5
Pyranometer BNC 5m Cable
Available in multiple lengths, this pyranometer comes with a cable and BNC termination and measures solar irradiance in W/m2. With a Microamp output, it an connect directly to LI-250A Light Meter or LI-1500 Light Sensor Logger. 2m, 5m, 15m, and 50m lengths.
LI-COR (HOBO, InTemp, LI-COR) · 7900-195-50
Pyranometer Installation Kit 50m Cable
This LI-COR Pyranometer Sensor Installation kit includes either a 5m or 50m LI-190R-BL cable, a 2003S Mounting and Leveling Fixture, and an installation guide.
LI-COR (HOBO, InTemp, LI-COR) · 7900-195-5
Pyranometer Installation Kit 5m Cable
This LI-COR Pyranometer Sensor Installation kit includes either a 5m or 50m LI-190R-BL cable, a 2003S Mounting and Leveling Fixture, and an installation guide.
LI-COR (HOBO, InTemp, LI-COR) · 7900-190-50
Quantum Sensor Kit 50m Cable
This LI-COR Quantum Sensor Kit includes either a 5m or 50m LI-190R-BL cable, a 2003S Mounting and Leveling Fixture, and an installation guide.
What do you need to measure?
Tell EIC Controls about your application.