Products
Data Loggers and Sensors for monitoring indoor, outdoor and aquatic environments.
LI-COR (HOBO, InTemp, LI-COR) · MX800-CAP
For both the MX801 and MX802 data loggers, this kit includes all you will need to replace the end cap of your logger:Removable End Cap Titanium Screw, 2-56 x .125Buna-N, O-Ring, 2mm x 31mm.2mm Allen wrench Silicon Grease
LI-COR (HOBO, InTemp, LI-COR) · LOCKING-CAP-00
Two-pack of replacement locking caps for HOBO MX2501 pH Data Logger Material: PolycarbonateWeight: .64 oz
LI-COR (HOBO, InTemp, LI-COR) · COUPLER2-E
Coupler for the HOBO Pro v2 series for communication with the Universal Base Station
LI-COR (HOBO, InTemp, LI-COR) · COUPLER2-B
Coupler for U20 Water Level Data Loggers
LI-COR (HOBO, InTemp, LI-COR) · RDO-CAP-1
Replaces the original DO sensor cap provided with DO sensors (W-DO). These caps have a 2-year cap life and will continue to operate after that, but possibly with reduced accuracy.
LI-COR (HOBO, InTemp, LI-COR) · U26-RDOB-1
The Replacement DO Sensor Cap replaces the original DO sensor cap that’s included with the HOBO DO Data Logger. The DO sensor caps have a 6-month deployment life. (The caps expire 7 months after initialization to allow some time before and after the…
LI-COR (HOBO, InTemp, LI-COR) · GROMMET-5
For use with HOBO MX2001 water level loggers deployed in high-humidity 2-inch wells. To ensure reliable performance, the grommet isolates the MX2001's barometric pressure sensor port from moisture in the well. When deploying MX2001 loggers in other size…
LI-COR (HOBO, InTemp, LI-COR) · 7500-950
Internal scrub chemicals for use with the LI-7500/A/RS/DS only. Includes two bottles prepared with Ascarite II and magnesium perchlorate. Order only when ready to use.
LI-COR (HOBO, InTemp, LI-COR) · 7700-950
Replacement internal chemical desiccant scrub bottle kit for LI-7700.
LI-COR (HOBO, InTemp, LI-COR) · HRB-2/3AA
Replacement battery for HOBO MX2300 series loggers. Lithium 2/3 AA
LI-COR (HOBO, InTemp, LI-COR) · HRB-LI-6
A cellophane-wrapped six-pack of long-lasting, cold-tolerant lithium AA batteries. These are the replacement batteries used in the battery-powered HOBO MicroRX Station (RX2101), the HOBO MicroRX Water Level Station (RX2103), and the HOBO MicroRX Station…
LI-COR (HOBO, InTemp, LI-COR) · 85-ORING-15
O-ring for 85-DOMEPLUG-1
LI-COR (HOBO, InTemp, LI-COR) · U12-015-ORING-E
Replacement O-ring kit (EPDM) U12-015 Oring-E is for food-grade application.
LI-COR (HOBO, InTemp, LI-COR) · U12-015-ORING-V
Replacement O-ring kit (Viton) U12-015 Oring-V is for petroleum application.
LI-COR (HOBO, InTemp, LI-COR) · HRB-NIMH-6
This is the replacement rechargeable battery pack for the solar-powered HOBO MicroRX Stations (RX2102 and RX2106) and the solar-powered HOBO MicroRX Water Level Station (RX2104).
LI-COR (HOBO, InTemp, LI-COR) · HUM-UPS-500
Replacement relative humidity sensor for H8, U10, or UX100-003 indoor data logger
LI-COR (HOBO, InTemp, LI-COR) · HUM-RHPCB-3C
Replacement relative humidity sensor for UX100-011A.
LI-COR (HOBO, InTemp, LI-COR) · 9972-007S
For use with the LI-7200. Thermocouple PCA (cell T Sensor).
LI-COR (HOBO, InTemp, LI-COR) · T-EG-x000-2775
Rope CTs are excellent for bus-bars and large switch-gear applications. Self-powered rope CTs are flexible and easy to install, but will not be accurate below 30A. Each CT includes the two-pin CT connector plug.
LI-COR (HOBO, InTemp, LI-COR) · 6512-095
Older model; To calibrate leaf area meter models LI-3000C and LI-3100. Replaced by P/N 9931-021
LI-COR (HOBO, InTemp, LI-COR) · RX2105
The compact HOBO MicroRX Station is an easy-to-deploy, low-cost cellular solution for long-term, reliable monitoring of indoor conditions in warehouses, cold storage facilities, data centers, museums, commercial and residential buildings, and more. The…
Tell EIC Controls about your application.