Products
Data Loggers and Sensors for monitoring indoor, outdoor and aquatic environments.
LI-COR (HOBO, InTemp, LI-COR) · SD-TEMP-50
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
LI-COR (HOBO, InTemp, LI-COR) · SD-TEMP-01
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
LI-COR (HOBO, InTemp, LI-COR) · SD-TEMP-20
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air/water/soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate…
LI-COR (HOBO, InTemp, LI-COR) · 8100-604
Used to fix and level a LI-COR® LI-190R PAR sensor in the soil. Includes Part Number 2003S Mounting & Leveling fixture.
LI-COR (HOBO, InTemp, LI-COR) · 9975-016
Replaced by 392-04993, RS-232 cable for LI-6400. 9-pin to 9-pin.
LI-COR (HOBO, InTemp, LI-COR) · 6400-27
Used with LI-COR instruments that provide serial output via an RS-232 cable.
LI-COR (HOBO, InTemp, LI-COR) · NIST-SETUP
Temperature point certification charge on a per-logger basis. This service provides testing and certification of Onset temperature data loggers' accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). For each…
LI-COR (HOBO, InTemp, LI-COR) · 84-000010
Whether you've started with one of our Standard or Premium Stilling Well Kits that offer approximately a four-foot depth, or are building your own stilling well from the ground up...you may need additional lengths of slotted or solid PVC pipe to customize the…
LI-COR (HOBO, InTemp, LI-COR) · 9915-005
This small plastic carrying case is sold with the LI-1500/G Light Sensor Logger. The internal foam is cut to support the LI-1500 and two light sensors. The LI-250A Light Meter can also fit snugly within the case.
LI-COR (HOBO, InTemp, LI-COR) · DESICCANT1
Small desiccants suitable for use in the Pendant (use DESICCANT5 for UA-003-64) and HOBO Pro v2 data loggers, packaged as a set of 25 desiccants.
LI-COR (HOBO, InTemp, LI-COR) · 6800-89
Chamber that provides the ability to measure CO2 respiration from insects, other very small animals, or small fruits. Provides a measure of CO2 exchange per unit of mass over time. Chamber includes: + (1) 9968-182 Custom Chamber Block
LI-COR (HOBO, InTemp, LI-COR) · S-BPB-CM50
The Barometric Pressure Smart Sensor has a measurement range of 660 mb to 1070 mb (19.47 to 31.55 inHg), and can perform measurement averaging to obtain the highest accuracy. The operating temperature range for this sensor is -40° to 70°C (-40° to 158°F).…
LI-COR (HOBO, InTemp, LI-COR) · S-ADAPT-6
Allows users to connect up to six Smart Sensors in a water-resistant enclosure to one sensor extension cable back to HOBO stations with Smart Sensor inputs
LI-COR (HOBO, InTemp, LI-COR) · S-EXT-M010
A 10-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
LI-COR (HOBO, InTemp, LI-COR) · S-EXT-M025
A 25-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
LI-COR (HOBO, InTemp, LI-COR) · S-EXT-M002
A 2-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
LI-COR (HOBO, InTemp, LI-COR) · S-EXT-M005
A 5-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
LI-COR (HOBO, InTemp, LI-COR) · 9964-090
CO2 scrubbing chemical for use with the LI-6800 and LI-6400/XT Portable Photosynthesis Systems only. Wet, 6-12 Mesh, 450G.
LI-COR (HOBO, InTemp, LI-COR) · 8100-612
Long-Term Chamber Gasket Kit (8100-104/C, 8200-104/C)
LI-COR (HOBO, InTemp, LI-COR) · 9981-125
8100-104 Opaque Long-Term Chamber Thermistor. 8100-104C chambers use 9981-172.
Tell EIC Controls about your application.