
LI-COR (HOBO, InTemp, LI-COR) · 392-10093
4p Male LI-7550
For LI-7550 Analyzer Interface Unit, 4-pin male connector
Products

LI-COR (HOBO, InTemp, LI-COR) · 392-10093
For LI-7550 Analyzer Interface Unit, 4-pin male connector

LI-COR (HOBO, InTemp, LI-COR) · U23-CAP
Five UV protection caps for U23 Series data loggers.

LI-COR (HOBO, InTemp, LI-COR) · SOLAR-5W
This solar panel is suitable for most locations. Includes 45-degree bracket for mast mounting

LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-5.0
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…

LI-COR (HOBO, InTemp, LI-COR) · CABLE-W-5.0
Provides the connection between the HOBO MX802 logger and a Conductivity sensor or CTD sensor. - Includes strain relief and Kevlar strength member for suspending sensors in a constant position - Easy to attach or change


LI-COR (HOBO, InTemp, LI-COR) · 392-10108
5m cable Turck-to-Turck 8PM-8PM, included with every LI-7200RS / LI-7500RS / LI-7700.

LI-COR (HOBO, InTemp, LI-COR) · 392-05622
DAC output cable for the original LI-7500; 4 meter; 5P Male Eurofast Cable

LI-COR (HOBO, InTemp, LI-COR) · CABLE-DR-060
This direct read cable provides the connection between the MX2001 logger's top-end unit and water level sensor. Cables can be ordered in lengths from 0.2 to 500m for deployment in a wide range of wells. Please see specifications for pricing on the cables.…

LI-COR (HOBO, InTemp, LI-COR) · CABLE-W-060
Provides the connection between the HOBO MX802 logger and a Conductivity sensor or CTD sensor. - Includes strain relief and Kevlar strength member for suspending sensors in a constant position - Easy to attach or change

LI-COR (HOBO, InTemp, LI-COR) · 591-15617
TDK-Lambda DC-to-DC converter; 60W 12V 5A; Used with biomet systems

LI-COR (HOBO, InTemp, LI-COR) · 9968-270
Spares Kit for Multiphase Flash Fluorometer With Apertures

LI-COR (HOBO, InTemp, LI-COR) · 392-05620
Serial cable for the original LI-7500; 4 meters; 6P Female Eurofast Cable

LI-COR (HOBO, InTemp, LI-COR) · 7900-730
Network Switch, 8 Ports, Industrial, Fast Ethernet, DIN Rail for mounting in Biomet or System Enclosures

LI-COR (HOBO, InTemp, LI-COR) · COND-CAL-4
These solutions’ conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle, and prepared against a NIST-traceable potassium chloride solution. Lot number and expiration date are…

LI-COR (HOBO, InTemp, LI-COR) · COND-CAL-1
These solutions’ conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle, and prepared against a NIST-traceable potassium chloride solution. Lot number and expiration date are…

LI-COR (HOBO, InTemp, LI-COR) · 9968-227
For use with the LI-6800 Portable Photosynthesis System. 25 cylinders per box.

LI-COR (HOBO, InTemp, LI-COR) · 392-13977
8PM-RJ45 EUROFAST ETHERNET SHIELDED CABLE 5M

LI-COR (HOBO, InTemp, LI-COR) · 392-16699
8PM-RJ45 EUROFAST ETHERNET 25M SHIELDED

LI-COR (HOBO, InTemp, LI-COR) · 90-CABLE-U30-3
Cable for connecting HRB-U30-S100 battery to U30s with s/n higher than 9673844

LI-COR (HOBO, InTemp, LI-COR) · COUPLER2-A
Coupler for UA Pendant Data Loggers

LI-COR (HOBO, InTemp, LI-COR) · P-AC-1
A switched AC power adapter with the following specifications: Input: 100-240VAC @ 50/60Hz 0.4A Output: 12VDC @ 1.0A

LI-COR (HOBO, InTemp, LI-COR) · AC-U30
120V, 60Hz AC linear power supply; output is 6 Volts DC, 2 Amps. - Works with remote monitoring systems

LI-COR (HOBO, InTemp, LI-COR) · AC-SENS-1
An AC power adapter that provides DC power to sensors that require it, expanding the range of 3rd-party sensors that can be used with Onset's HOBO RX3000, U12, U30-NRC, and ZW series products. Input: 100-240VAC @ 50/60Hz 0.2A Output: 12VDC @ 0.5A
Tell EIC Controls about your application.