Products
LI-COR (HOBO, InTemp, LI-COR) · W-GUARD-1
This copper anti-fouling guard helps to extend the time between sensor cleanings by slowing the growth of biofouling, while allowing good water flow to the sensor. - Easy to install and remove for sensor cleaning - Held in place by two rubber O-rings
LI-COR (HOBO, InTemp, LI-COR) · 9968-271
Conifer Sprig Adapter Kit for the 6800-13
LI-COR (HOBO, InTemp, LI-COR) · ANTI-FOUL-TAPE
Ensure your equipment is protected and data readings remain accurate by applying this naturally anti-fouling copper tape to your water monitoring deployments. A simple, affordable solution to prevent bio-fouling, this tape's copper possesses natural…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-1-CRIMP
An envelope of twelve 3/8-inch long stainless-steel crimp sleeves for use with 1/16" Teflon-coated stainless-steel cable.
LI-COR (HOBO, InTemp, LI-COR) · 7900-342
To mount an LI-7200, LI-7700, WindMaster® or WindMaster® Pro.
LI-COR (HOBO, InTemp, LI-COR) · 7900-454-5
5m cable connects the CSAT3 sonic anemometer to the SmartFlux2 system. Includes an RS-232-to-USB adapter for connection to a computer.
LI-COR (HOBO, InTemp, LI-COR) · 180-02
Rubber optical cover used for dark calibration of the LI-180 and protection of the optical sensor.
LI-COR (HOBO, InTemp, LI-COR) · DESIC-PACK
Two replacement desiccant packs for HOBO H8 & U12 4-Channel Outdoor/Industrial data loggers.
LI-COR (HOBO, InTemp, LI-COR) · DESICCANT5
Small desiccants suitable for use in the Pendant UA-003-64, packaged as a set of 25 desiccants.
LI-COR (HOBO, InTemp, LI-COR) · A-H22-DINMOUNT-1
When used with the Mounting Feet Kit (A-H22-MOUNT-1), the HOBO Energy Data Logger system snaps securely to standard 32mm and 35mm DIN rails.
LI-COR (HOBO, InTemp, LI-COR) · 85-DOMEPLUG
Dome plug to access serial comm port - requires 85-ORING-14
LI-COR (HOBO, InTemp, LI-COR) · 294-03334
Rotometer flow meter with integrated valve. Requires two hose barb fittings P/N 300-03388.
LI-COR (HOBO, InTemp, LI-COR) · 84-000012
An affordable, durable solution to secure your well monitoring deployment, this non-corrosive ECOPlug® locking well cap fits within 2-inch diameter pipes to prevent contamination or tampering of your stilling well. This can be used with your own stilling well…
Marca por confirmar · EIC28312-1
EIC28312-1 can be connected with load cell or other force transducer directly, with fast response, high precision, stable measurement, tare weight, display correction and other adjustment functions. It has 6-channel switch control for start/stop, fast…
LI-COR (HOBO, InTemp, LI-COR) · 85-CAPLUG-H20-B
Replacement end cap for a BOOT-BLK protective boot for HOBO Water Temp Pro
LI-COR (HOBO, InTemp, LI-COR) · 85-CAPLUG-H20-W
Replacement end cap for a BOOT-WHT protective boot for HOBO Water Temp Pro
LI-COR (HOBO, InTemp, LI-COR) · 392-10107
Ethernet adapter with RJ45 to weatherproof Turck (8PF) connector. Included with every LI-7200RS / LI-7500RS / LI-7700.
LI-COR (HOBO, InTemp, LI-COR) · 6400-88
Water jackets allowing for increased range of temperature control of the LI-6400 sensor head block. Water pump, tubing and water supply not included.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-RX-PWR
To connect a user-supplied power source to the HOBO RX3000 Monitoring Station to charge the station's internal battery. The external power source can be an intermittent power source, such as a 6W or larger solar panel. The external power source must be able…
LI-COR (HOBO, InTemp, LI-COR) · 392-05618
SDM interface cable for LI-7500 Control Box (not LI-7550 AIU) 5-pin female connector
LI-COR (HOBO, InTemp, LI-COR) · 300-03425
Female Luer lock connector for LI-610
LI-COR (HOBO, InTemp, LI-COR) · 9960-040
Filter discs with adhesive ring for 9960-093 scrub and desiccant tube.
Tell EIC Controls about your application.