Brand
Agricultural Research · Environmental Research · Energy · Weather
LI-COR (HOBO, InTemp, LI-COR) · 7500-950
Internal scrub chemicals for use with the LI-7500/A/RS/DS only. Includes two bottles prepared with Ascarite II and magnesium perchlorate. Order only when ready to use.
LI-COR (HOBO, InTemp, LI-COR) · 7700-950
Replacement internal chemical desiccant scrub bottle kit for LI-7700.
LI-COR (HOBO, InTemp, LI-COR) · HRB-2/3AA
Replacement battery for HOBO MX2300 series loggers. Lithium 2/3 AA
LI-COR (HOBO, InTemp, LI-COR) · HRB-LI-6
A cellophane-wrapped six-pack of long-lasting, cold-tolerant lithium AA batteries. These are the replacement batteries used in the battery-powered HOBO MicroRX Station (RX2101), the HOBO MicroRX Water Level Station (RX2103), and the HOBO MicroRX Station…
LI-COR (HOBO, InTemp, LI-COR) · 85-ORING-15
O-ring for 85-DOMEPLUG-1
LI-COR (HOBO, InTemp, LI-COR) · U12-015-ORING-E
Replacement O-ring kit (EPDM) U12-015 Oring-E is for food-grade application.
LI-COR (HOBO, InTemp, LI-COR) · U12-015-ORING-V
Replacement O-ring kit (Viton) U12-015 Oring-V is for petroleum application.
LI-COR (HOBO, InTemp, LI-COR) · HRB-NIMH-6
This is the replacement rechargeable battery pack for the solar-powered HOBO MicroRX Stations (RX2102 and RX2106) and the solar-powered HOBO MicroRX Water Level Station (RX2104).
LI-COR (HOBO, InTemp, LI-COR) · HUM-UPS-500
Replacement relative humidity sensor for H8, U10, or UX100-003 indoor data logger
LI-COR (HOBO, InTemp, LI-COR) · HUM-RHPCB-3C
Replacement relative humidity sensor for UX100-011A.
LI-COR (HOBO, InTemp, LI-COR) · 9972-007S
For use with the LI-7200. Thermocouple PCA (cell T Sensor).
LI-COR (HOBO, InTemp, LI-COR) · T-EG-x000-2775
Rope CTs are excellent for bus-bars and large switch-gear applications. Self-powered rope CTs are flexible and easy to install, but will not be accurate below 30A. Each CT includes the two-pin CT connector plug.
LI-COR (HOBO, InTemp, LI-COR) · 6512-095
Older model; To calibrate leaf area meter models LI-3000C and LI-3100. Replaced by P/N 9931-021
LI-COR (HOBO, InTemp, LI-COR) · RX2105
The compact HOBO MicroRX Station is an easy-to-deploy, low-cost cellular solution for long-term, reliable monitoring of indoor conditions in warehouses, cold storage facilities, data centers, museums, commercial and residential buildings, and more. The…
LI-COR (HOBO, InTemp, LI-COR) · RXMOD-A1
The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements. These four, single-ended sensor inputs are configured through HOBOlink. A HOBO RX3000 is required for this product.
LI-COR (HOBO, InTemp, LI-COR) · RX3000-INDOOR
The most flexible remote data logging station, this cellular station provides instant access to site-specific indoor environmental data anywhere, at any time, via the internet and an RX data plan that gives you access to the powerful tools of LI-COR Cloud…
LI-COR (HOBO, InTemp, LI-COR) · RXMOD-R1
The optional Relay Module allows for up to three individual relays to be activated or pulsed in response to alarms. Each relay contact closure can be configured as normally open or normally closed through HOBOlink. A HOBO RX3000 is required for this product.
LI-COR (HOBO, InTemp, LI-COR) · RX3004-00-01
The most flexible remote data logging station from HOBO Data Loggers, the HOBO RX3000 provides instant access to site-specific environmental data anywhere, at any time, via the internet. This configurable station combines the versatility and sensor quality of…
LI-COR (HOBO, InTemp, LI-COR) · RXMOD-W1
The RX3000 Water Level Sensor Module (RXMOD-W1) offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure with the HOBO RX3000 Remote Monitoring Station. It is configured through HOBOlink, Onset’s cloud-based…
LI-COR (HOBO, InTemp, LI-COR) · RX3004-CH-KIT-REP
Used to provide a weather-tight seal for external sensor cable connections to the RX3004 station, this channel kit contains all the replacement parts needed to replace the original assembly provided with the station. Included in this kit:Top Cable Mold Bottom…
LI-COR (HOBO, InTemp, LI-COR) · RXW-BRACKET
This bracket is required for mounting RXW sensor nodes, repeaters, and managers.
Tell EIC Controls about your application.