LI-COR (HOBO, InTemp, LI-COR) · 7900-235
Terminal Blocks
Set of terminal blocks, a circuit breaker, and wiring for installation in the 7900-050 Systems Enclosure to distribute power to equipment inside and outside of the enclosure.
Brand
LI-COR (HOBO, InTemp, LI-COR)
Agricultural Research · Environmental Research · Energy · Weather
Filters
Applications
LI-COR (HOBO, InTemp, LI-COR) · 331-05273
Terminal strip for LI-8x0
14-pin terminal block; for use with LI-850, LI-840/A, LI-830, LI-820, and LI-800
LI-COR (HOBO, InTemp, LI-COR) · 392-09436
TGA to LI-8100A 2m Cable
Integrates LI-COR Trace Gas Analyzers with the LI-8100A system; 2 meters
LI-COR (HOBO, InTemp, LI-COR) · 9982-081
Thermistor Assembly for Flasks
Thermistor for use with the 8250-660 Flask Sampling Kit. Thermistor includes 15 meter long cable, terminating in bare leads.
LI-COR (HOBO, InTemp, LI-COR) · 9968-162
Thermocouple Adapter Cable
Thermocouple Adapter Cable for 6800-19 Custom Chamber, 6800-09 Soil CO2 Flux Chamber, and 8200-01S Smart Chamber.
LI-COR (HOBO, InTemp, LI-COR) · 9977-038
Thermocouple Module Assembly
For use in the LI-7700 Open Path CH4 Analyzer.
LI-COR (HOBO, InTemp, LI-COR) · NIST-RH-THREEPOINT
Three Point NIST RH Certification
Onset offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). This includes single-point (50% RH @ 25C) or three-point (25, 50,…
LI-COR (HOBO, InTemp, LI-COR) · BOOT-TIDBIT-BK
TidbiT Boot Black Housing
A thermoplastic elastomer boot that provides cushioning for use in harsh conditions. Offered in black to minimize underwater visibility. Five boots included.
LI-COR (HOBO, InTemp, LI-COR) · 8100-664
Trace Gas Sample Kit
Used to collect samples from the same air stream used to measure CO2 flux for further trace gas analysis using a GC or other method. The 8100-664 accessory is an assembled section of air line with a T-fitting and septum, and quick connectors at each end. This…
LI-COR (HOBO, InTemp, LI-COR) · 35TB
Transparent belt for LI-3050C
For use with the LI-3050C. Requires two for replacement.
LI-COR (HOBO, InTemp, LI-COR) · 3100TBL
Transparent belt for LI-3100
Lower transparent belt Upper transparent belt
LI-COR (HOBO, InTemp, LI-COR) · 3100TBU
Transparent belt for LI-3100
Lower transparent belt Upper transparent belt
LI-COR (HOBO, InTemp, LI-COR) · 550FM
TriSonica Mini-FB Tripod Mount
Tripod mounting attachment for LI-550F TriSonica Mini with flat bottom
LI-COR (HOBO, InTemp, LI-COR) · 550PM
TriSonica Mini-PM Tripod Mount
Tripod mounting attachment for LI-550P TriSonica Mini with pipe mount
LI-COR (HOBO, InTemp, LI-COR) · 550USB
TriSonica USB to RS-232 Interface
USB to RS-232 Interface for TriSonica Sensor Products LI-550 and LI-560
LI-COR (HOBO, InTemp, LI-COR) · 9861-036
Tube Fitting Nut
Secures Bev-A-line 1/8" ID tubing to air inlets. Used with LI-800, LI-820 LI-840/A, LI-830, LI-850, LI-6400/XT, LI-610 etc.
LI-COR (HOBO, InTemp, LI-COR) · 9982-073
Tube T-splitter for the LI-8250
Tubing and T-Splitter for connecting two gas analysers to the inlet/outlet connectors of the Multiplexer LI-8250 or the Smart Chamber. P/N 9982-011 Cable Assembly needed, one per analyzer.
LI-COR (HOBO, InTemp, LI-COR) · 434-17187
Type E Thermocouple
Thermocouple used with the 6800-19 Custom Chamber Adapter (adapter cable, part number 9968-162, is sold separately).
LI-COR (HOBO, InTemp, LI-COR) · 374-04317
Type E thermocouple wire
Thermocouple wire; 24 AWG Duplex "E" Type; Used with the LI-6400/XT
LI-COR (HOBO, InTemp, LI-COR) · TC6-J
Type J Beaded Thermocouple - Range: 0 to 250°C Sensor
The Type J 6 ft Beaded Thermocouple probe includes 1.8m (6') of insulated 30-AWG wire wound on an integrated spool caddy /subminiature connector. Color-coded for type J (black) thermocouples according to the ANSI standard.
LI-COR (HOBO, InTemp, LI-COR) · SMC-J
Type J Subminiature Connector Adapter
The Type J Subminiature Connector accepts stranded or solid wire up to 20 AWG with an internal silicone grommet for strain relief and captive cover screws. This connector is color-coded black for J thermocouples according to the ANSI standard, and offers a…
LI-COR (HOBO, InTemp, LI-COR) · TC6-k
Type Jk Beaded Thermocouple - Range: 0 to 480°C Sensor
The Type k 6 ft Beaded Thermocouple probe includes 1.8m (6') of insulated 30-AWG wire wound on an integrated spool caddy /subminiature connector. Color-coded for type k (yellow) thermocouples according to the ANSI standard.
LI-COR (HOBO, InTemp, LI-COR) · TCP6-K12
Type K 30cm Probe Thermocouple Sensor Range: 0°C to 900°C
The TCP6-K12 Type K thermocouple probe can measure up to 900°C when connect to the UX100 thermocouple logger. The TCP6-K12 stainless-steel probe is 30cm in length, 0.5cm in diameter and is mounted on a 2.5cm handle with spring-type strain relief. The 1.8m…
What do you need to measure?
Tell EIC Controls about your application.