Price on request
The HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C in air and up to 50°C in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2’s optical USB interface makes it possible to offload data even while the logger is wet or underwater. A solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).
Saves this product and the next ones you view in this browser, up to eight, for 30 days. You can disable it under “History” in the footer.
History is enabled in this browser. History
Research-grade measurements at an affordable price
Waterproof to 120 meters
Data readout in less than 30 seconds via fast Optic USB interface
Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis
The U22-001 data logger supports the following measurements: Temperature and Water Temperature
Operation range†: -40° to 70°C in air; maximum sustained temperature of 50°C in water
Accuracy: ±0.21°C from 0° to 50°C
Resolution: 0.02°C at 25°C
Response time: (90%) 5 minutes in water; 12 minutes in air moving 2 m/sec (typical)
Stability (drift): 0.1°C per year
Real-time clock: ± 1 minute per month 0° to 50°C
Battery: 2/3 AA, 3.6 Volt Lithium, factory-replaceable ONLY
Battery life (typical use): 6 years with 1 minute or greater logging interval
Memory (non-volatile): 64K bytes memory (approx. 42,000 12-bit temperature measurements)
Weight: 42 g
Dimensions: 3.0 cm (1.19 in.) maximum diameter, 11.4 cmlength; mounting hole 6.3 mm diameter
Wetted materials: Polypropylene case, EPDM® o-rings, stainless steel retaining ring
Buoyancy (fresh water): +13 g in fresh water at 25°C; +17 g with optional boot
Waterproof: To 120 m
Shock/drop: 1.5 m drop at 0°C to 70°C
Logging interval: Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to HOBOware software manual.
Launch modes: Immediate start and delayed start
Offload modes: Offload while logging; stop and offload
Battery indication: Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.
NIST certificate available: for additional charge
Environmental Rating: IP68
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
†IMPORTANT: The plastic case will become brittle at temperatures lower than -20°C. If the logger is deployed in a location where the temperature drops below -20°C, make sure the logger remains stationary and is not pulled on or struck. Return the logger to above -20°C before handling.
No published specifications for this product.
LI-COR (HOBO, InTemp, LI-COR) · MX2203
The HOBO MX2203 TidbiT waterproof temperature logger leverages the power of Bluetooth Low Energy (BLE) to deliver high-accuracy temperature measurements straight to your iOS or Android mobile device. Designed for durability, this rugged waterproof logger is…
LI-COR (HOBO, InTemp, LI-COR) · MX2204
The HOBO MX2203 TidbiT waterproof temperature logger leverages the power of Bluetooth Low Energy (BLE) to deliver high-accuracy temperature measurements straight to your iOS or Android mobile device. Designed for durability, this rugged waterproof logger is…
LI-COR (HOBO, InTemp, LI-COR) · UTBI-001
Com apenas 3x4 cm, este minúsculo registador de dados mede temperaturas numa vasta gama de temperaturas. O TidbiT v2 oferece uma resolução de 12 bits e tem uma precisão de ±0,2 °C. Foi concebido para ambientes exteriores e subaquáticos e é à prova de água até…
Tell EIC Controls about your application.