Water Level/Flow

Stevens SDX Pressure Sensor

Reference
T-SDX-93720-xxx-xxx

Price on request

The Stevens SDX (Submersible Depth Transmitter) is a high-accuracy water level/depth sensor that works with Onset’s HOBO® RX3000 cellular weather station to bring your water level data to the web. Suitable for a wide range of level monitoring applications, the SDX is a cost-effective option for remote, real-time water level data collection. It is recommended that each SDX vent tube is protected from water ingress with either a vent tube cap (T-SDX-93030-500) or a desiccant cartidge (T-SDX-93030-010).

  • Power requirements 9 - 30 VDC
  • Output 4-20 mA current signal, linearly corresponding to range
  • Operating temperature -40° F to 185° F (-40° C to 85° C)
  • Compensated temperature 32° F to 122° F (0° C to 50° C)
  • Linearity 0-5 ft range: 0.2% max.
  • Repeatability & hysteresis Typical: ± 0.2% span
Talk to a specialist

Overview

Highlighted Features

Rugged housing and fully-potted electronics ensure reliability, even in hostile fluid environments
Provides remote access to water level data when paired with HOBO RX3000 weather stations via Onset’s web platform, HOBOlink.com
Custom-length cables enable use in a wide range of wells
Typically provides +/- 0.1% accuracy (full scale)
Ideal for groundwater and aquifer monitoring, stream and river gaging, and storm surge monitoring and more
Pre-configured kits available combining the HOBO RX3000 cellular remote monitoring station with the Stevens SDX water level sensor

Note: A calibration certificate is not included with the purchase of this sensor.

The T-SDX-93720-xxx-xxx sensor supports the following measurements: Remote Water Level Monitoring and Water Level

Power requirements 9 - 30 VDC
Output 4-20 mA current signal, linearly corresponding to range
Operating temperature -40° F to 185° F (-40° C to 85° C)
Compensated temperature 32° F to 122° F (0° C to 50° C)
Linearity 0-5 ft range: 0.2% max.
0-10 ft range: 0.2% max.
0-35 ft range: 0.3% max.
0-50 ft range: 0.3% max.
(0.1% typical for all ranges)
Repeatability & hysteresis Typical: ± 0.2% span
Reverse polarity protection Built into sensor
Overpressure 0-5 ft: 20 psi max.
0-10 ft: 20 psi max.
0-35 ft: 45 psi max.
0-50 ft: 45 psi max.
Shock Qualification tested to 150 g
Wiring Red: power
Green: 4-20 mA return
Silver: drain wire
Pipe threading 1/2-14 straight pipe thread (back of sensor housing near cable)
3/8-18 straight pipe thread (under removable copper nose-cone)
Physical size 4.00" L x 0.84" dia. (101.6 mm L x 21.33 mm dia.)
Weight Probe: 2.37 oz (61.19 g)
Cable: 0.43 oz (12.19 g) per foot (.4 g per cm)
(weights are approximate)

Part Numbers:

T-SDX-93720-105-010
T-SDX-93720-105-020
T-SDX-93720-105-030
T-SDX-93720-105-050
T-SDX-93720-105-100

T-SDX-93720-110-010
T-SDX-93720-110-020
T-SDX-93720-110-030
T-SDX-93720-110-050
T-SDX-93720-110-100

T-SDX-93720-135-020
T-SDX-93720-135-030
T-SDX-93720-135-050
T-SDX-93720-135-100

T-SDX-93720-150-050
T-SDX-93720-150-100

Related products

HOBO U30 USB Weather Station Data Logger

LI-COR (HOBO, InTemp, LI-COR) · U30-NRC

HOBO U30 USB Weather Station Data Logger

This rugged weather station is Onset’s most durable outdoor environmental monitoring solution. Users can easily configure the HOBO U30-NRC Weather Station to fit their application needs. Use up to 15 channels to collect environmental data and then upload to…

View product

What do you need to measure?

Tell EIC Controls about your application.