Products
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP10
The CABLE-ADAP10 is an external input cable providing analog sensor input of 0-10 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-2.5-STEREO
An external input cable with 13mm tinned braided wire leads. Voltage input specifications vary with attached data logger.Overall length of this cable is 1.8m.
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP24
The CABLE-ADAP24 is an external input cable providing analog sensor input of 0-24 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm (0.5") tinned braided wire leads and a total length…
LI-COR (HOBO, InTemp, LI-COR) · CABLE-ADAP5
The CABLE-ADAP5 is an external input cable providing analog sensor input of 0-5 Vdc max. for HOBO ZW Series data nodes, UX120, and U12 series data loggers with one or more analog inputs. The cable has 13mm tinned braided wire leads and a total length 1.9m.
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-150
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · T-CON-ACT-300
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC. Requirements for use with specific data loggers: HOBO MX1100 series: a 4-20mA…
LI-COR (HOBO, InTemp, LI-COR) · S-RGA-M002
Measures rainfall with intensity up to five inches per hour with a resolution of 0.01 inch, and 1% accuracy for rainfall rates up to 1"/hour. The tipping bucket mechanism is mounted on a stainless-steel shaft with brass bearings. This model includes a 2m…
LI-COR (HOBO, InTemp, LI-COR) · CTV-C
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-100
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SCT-100
The Magnelab AC Current 100 Amp AC Current Transformer or CT (Magnelab part SCT-1250-100) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for…
LI-COR (HOBO, InTemp, LI-COR) · T-ASH-G2-100
The Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids, with an accuracy of ±1% FS from -20° to 85°C (-4° to 185°F) and only ±1.5% FS -40° to -20°C and 85° to 125°C…
LI-COR (HOBO, InTemp, LI-COR) · S-SMD-M005
Measure soil moisture over a large volume of soil with the affordably-priced 10HS Soil Moisture Smart Sensor. This sensor integrates the field-proven 10HS Sensor and a 12-bit A/D, providing ±3% accuracy in most soils conditions, and ±2% accuracy with…
LI-COR (HOBO, InTemp, LI-COR) · S-CIA-CM14
The 12-bit 4-20 mA Input Adapter interfaces with any sensor providing a 4-20 mA signal to connect to smart sensor compatible HOBO stations. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external…
LI-COR (HOBO, InTemp, LI-COR) · S-TMB-M017
The 12-bit Temperature Smart Sensor provides < ± 0.2° C total accuracy and resolution of < ± 0.03° C over the range of from 0° to 50° C. The full measurement range is -40° to 100° C. A selectable measurement-averaging feature further improves accuracy.…
LI-COR (HOBO, InTemp, LI-COR) · S-TMB-M006
The 12-bit Temperature Smart Sensor provides < ± 0.2° C total accuracy and resolution of < ± 0.03° C over the range of from 0° to 50° C. The full measurement range is -40° to 100° C. A selectable measurement-averaging feature further improves accuracy.…
LI-COR (HOBO, InTemp, LI-COR) · S-THB-M002
The 12-bit Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the…
LI-COR (HOBO, InTemp, LI-COR) · S-VIA-CM14
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SPT-150
The Magnelab AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to 130% of rated voltage).…
LI-COR (HOBO, InTemp, LI-COR) · CTV-A
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-ACT-0750-020
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-0400-20
A small 20 AMP split-core AC Current Transformer (CT) mounted around a current carrying wire to measure AC amperage. This CT provides a .333 Volt AC output proportional to current flow and is used with HOBO data loggers via the FlexSmart TRMS module and with…
LI-COR (HOBO, InTemp, LI-COR) · CTV-D
This split-core sensor records AC amperage; for use with HOBO U12, UX120-006M, MX1100, and ZW series external-channel data loggers. With an input of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag. - UL listed -…
LI-COR (HOBO, InTemp, LI-COR) · T-MAG-SCT-200
The Magnelab AC Current 200 Amp AC Current Transformer or CT (Magnelab part SCT-1250-200) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart TRMS Module for…
LI-COR (HOBO, InTemp, LI-COR) · T-ASH-G2-200
The Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids, with an accuracy of ±1% FS from -20° to 85°C (-4° to 185°F) and only ±1.5% FS -40° to -20°C and 85° to 125°C…
Tell EIC Controls about your application.