Products
LI-COR (HOBO, InTemp, LI-COR) · S-VIA-CM14
The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external…
Marca por confirmar · EC1550
The EC1550 sensor adds a digital output to the proven reliability and durability of the EC1500 which has been used in the water industry for decades. With advanced power management included in the new SDI-12 control system, the EC1550 draws less than 5mA in…
LI-COR (HOBO, InTemp, LI-COR) · MX20L
A low-cost, research-grade data logger with Bluetooth data offload to continuously monitor water level and temperature. Measures at depths of up to 4, 9, or 30m in a wide range of underwater environments, both freshwater and saltwater.
LI-COR (HOBO, InTemp, LI-COR) · MX801 • MX802
Highly configurable, wireless multiparameter loggers that integrate sensors (purchased separately) for measuring water conductivity/salinity, temperature, level, and dissolved oxygen
LI-COR (HOBO, InTemp, LI-COR) · SD-VOLT-10
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this DC voltage input cable offers integrated strain relief to keep it connected to the logger, and it features Self-Describing technology to automatically communicate configuration information…
LI-COR (HOBO, InTemp, LI-COR) · SD-VOLT-2.5
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this DC voltage input cable offers integrated strain relief to keep it connected to the logger, and it features Self-Describing technology to automatically communicate configuration information…
LI-COR (HOBO, InTemp, LI-COR) · SD-VOLT-24
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this DC voltage input cable offers integrated strain relief to keep it connected to the logger, and it features Self-Describing technology to automatically communicate configuration information…
LI-COR (HOBO, InTemp, LI-COR) · SD-VOLT-05
For use with HOBO MX1104 and MX1105 multi-channel data loggers, this DC voltage input cable offers integrated strain relief to keep it connected to the logger, and it features Self-Describing technology to automatically communicate configuration information…
Marca por confirmar · H28LM
H28LM Series Water Level Meter with Laser Marked Tape for accurately measuring the depth of water in wells, boreholes, standpipes, and tanks. The H28LM Series Water Level Meter is supplied on a sturdy winding reel complete with a brake, carrying handle and a…
Marca por confirmar · CDTs
Marca por confirmar · T28ACO2
The measurement of dissolved carbon dioxide (excluding HCO3- and CO32-) in water is one of the mostimportant parameters for water monitoring. The T28ACO2 now a new membrane covered optical CO2 sensor with titanium housing and other improved characteristics.…
Marca por confirmar · EIC-28F6000-P
The EIC-28F6000 series flowmeter consists of flow calculator and the Ultraflow EIC-286537, it is used to measure water velocity, depth, pressure temperature and conductivity of water flowing in rivers, streams, open channels and pipes. The flow calculator can…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4103T-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4103S-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4104S-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4104T-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4105T-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4105S-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4503S-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4503T-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4504S-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4504T-025
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS2101S-025
The pHionics STs Series™ ORP sensor (sonde) provides reliable ORP and measurements to monitor bacterial activity, sanitization, or heavy metal pollution. This sensor may be connected to an RX station using an an Analog Mote and HOBOnet Manager (wireless) or…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS1014T-025
The pHionics STs Series™ pH sensor provides accurate pH and temperature measurements. These measurements are output via two 4-20 mA signals that easily connect to HOBO stations and HOBOnet motes with analog inputs. The compact design makes the rugged…
Tell EIC Controls about your application.