Brand
Agricultural Research · Environmental Research · Energy · Weather
LI-COR (HOBO, InTemp, LI-COR) · MX2500-STORE-SOLN
The Electrode Storage Solution is used to properly store and condition the pH electrode that is used with the HOBO MX pH Logger. The purpose of the storage solution is to maintain the hydrated gel layer that is integral to accurate pH readings.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-END-CAP
The replacement sensor end cap replaces the original sensor end cap that ships with the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-MAINT-KIT
The Maintenance Kit includes the Calibration Kit (MX2500-CAL-KIT) and the Electrode Storage Solution (MX2500-STORE-SOLN).
LI-COR (HOBO, InTemp, LI-COR) · MX2500-ELECTRODE
With its gel electrolyte and double Pellon® junction minimizing the chance of contamination of the reference electrolyte, this plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are perfectly suited for environmental monitoring of…
LI-COR (HOBO, InTemp, LI-COR) · MX2502
Bluetooth logger with PAR, temperature, tilt sensors Delivers highest-accuracy measurements of photosynthetically active radiation (PAR), temperature, and tilt for both underwater and above water environments. Important Information Requires a compatible…
LI-COR (HOBO, InTemp, LI-COR) · HOUSING-2
This accessory provides a protective housing for the HOBO MX801 logger using the 2-sensor adapter (W-ADAPT-2). Providing additional stability and protection, this creates a rugged assembly for mounting on buoy lines or cement blocks. The housing features…
LI-COR (HOBO, InTemp, LI-COR) · MX801-DO-KIT
LI-COR (HOBO, InTemp, LI-COR) · 9968-317
Humidifier column for the LI-6800. Features Nafion tubing.
LI-COR (HOBO, InTemp, LI-COR) · M-NDVI
NDVI Bracket. This bracket is used to mount two PAR sensors (Part S-LIA-M003) and two solar radiation sensors (Part S-LIB-M003) on the Light Sensor Bracket (Part M-LBB) for making the measurements needed to calculate the Normalized Difference Vegetation Index…
LI-COR (HOBO, InTemp, LI-COR) · NIST-TEMP-POINT
Temperature point certification charge on a per-data logger basis. This service provides testing and certification of Onset temperature data loggers' accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). For each…
LI-COR (HOBO, InTemp, LI-COR) · T-MINOL-130-NL
Measure cold and hot water flow rates with this compact, affordable water meter. The small-sized T-MINOL-130-NL is designed for deployment in apartments, assisted living communities, and other commercial buildings. Please note, the T-MINOL is configured for…
LI-COR (HOBO, InTemp, LI-COR) · 192-01919
O-ring seal between CO2 source assembly and console of the LI-6400(XT).
LI-COR (HOBO, InTemp, LI-COR) · OLUBE-2-00
Useful as an assembly aid for O-rings and seals, this silicone oil lubricant can be used as an assembly lubricant on all rubber polymers and makes an excellent thread lubricant and anti-seize agent. Parker’s Super O-Lube offers outstanding performance in…
LI-COR (HOBO, InTemp, LI-COR) · NIST-RH-ONEPOINT
Onset offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). This includes single-point (50% RH @ 25C) or three-point (25, 50,…
LI-COR (HOBO, InTemp, LI-COR) · BASE-U-4
The Universal Optic USB Base Station and couplers are used to offload data from any HOBO® data logger with an Optic USB interface. The splash-resistant Optic USB Base Station connects to your computer via USB, while connecting to the data logger via an…
LI-COR (HOBO, InTemp, LI-COR) · BASE-U-1
The Pendant Base Station and Coupler provide fast optical infrared (IR) communication for easy data logger launch and readout of HOBO Pendant data loggers. The Base Station connects via USB to a host computer, while the Coupler attaches the data logger to the…
Tell EIC Controls about your application.