Brand
Agricultural Research · Environmental Research · Energy · Weather
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS3020S-025
The pHionics STs Series™ Dissolved Oxygen sensor accurately measures dissolved oxygen and temperature (0-50°C) over long periods of time with little maintenance required. These measurements are output via two noise-resistant 4-20 mA signals that easily…
LI-COR (HOBO, InTemp, LI-COR) · LI-210R-BNC-15
This photometric sensor measures illuminance in lux, for indoor lighting studies, and comes with a 2m, 5m, 15m, or 50m meter cable and BNC termination.
LI-COR (HOBO, InTemp, LI-COR) · LI-210R-BNC-2
This photometric sensor measures illuminance in lux, for indoor lighting studies, and comes with a 2m, 5m, 15m, or 50m meter cable and BNC termination.
LI-COR (HOBO, InTemp, LI-COR) · LI-210R-BNC-5
This photometric sensor measures illuminance in lux, for indoor lighting studies, and comes with a 2m, 5m, 15m, or 50m meter cable and BNC termination.
LI-COR (HOBO, InTemp, LI-COR) · S-LIA-M003
The Photosynthetic Light (PAR) Smart Sensor is intended to measure light intensity for the frequencies relevant for photosynthesis. This sensor has a measurement range of 0 to 2500 umol/m2/sec over wavelengths from 400 to 700 nm. Enclosed in a anodized…
LI-COR (HOBO, InTemp, LI-COR) · M-PLT
The M-PLT Plate Mount, LI-COR Light Sensors is designed for use with LI-COR Light Sensors. This plate mount accessory includes the necessary hardware for securely attaching the fixture to the M-LBB Light Sensor Bracket and 2003S Mounting & Leveling Fixture.…
LI-COR (HOBO, InTemp, LI-COR) · W-PLUG
A protective plug to seal unused sensor inputs on MX800 data loggers. The primary function of this plug is to make the MX802 logger weatherproof when it's being used to record barometric pressure without a sensor attached.
LI-COR (HOBO, InTemp, LI-COR) · RG3-M
The Data Logging Rain Gauge is a battery-powered rainfall data collection and recording system which includes a HOBO® Pendant Event data logger integrated into a tipping-bucket rain gauge. This model automatically records up to 3200 mm of rainfall data that…
LI-COR (HOBO, InTemp, LI-COR) · 9982-008
Smart Chamber to LI-870 power; 2.5 x 5.5 mm PLUG IP68 1.2 m cable
LI-COR (HOBO, InTemp, LI-COR) · 9975-030
For use with the LI-7500DS/A/RS and LI-7200/RS CO2/H2O Analyzers, LI-7700 CH4 Analyzer, and the 7200-101/102 Flow Module. For the LI-7500, purchase part number 392-05619.
LI-COR (HOBO, InTemp, LI-COR) · 392-05619
For use with the LI-7500 Open Path CO2/H2O Analyzer only. For the LI-7500A, purchase part number 9975-030
LI-COR (HOBO, InTemp, LI-COR) · 8150-706
DC Power Cable, 3m (LI-8250, LI-8150)
LI-COR (HOBO, InTemp, LI-COR) · 591-06793
Power supply; 19V 72W Table-top; Used with the LI-6400/XT
LI-COR (HOBO, InTemp, LI-COR) · 9968-232
Universal power supply with cable. Used with Trace Gas Analyzers (LI-7810, LI-7815, LI-7820, and LI-7825) the LI-6800, and a variety of aquatic analyzers.
LI-COR (HOBO, InTemp, LI-COR) · WELL-KIT-P
Streamline your stilling well deployment with this ready-to-assemble kit that includes a premium HOBO locking WELL-CAP-02 that's optimal for deploying Bluetooth wireless loggers for MicroRX stations, RXW water level sensors, and the MX2001 data logger. This…
LI-COR (HOBO, InTemp, LI-COR) · 610-01452
Red protective plastic cap for terrestrial sensor.
LI-COR (HOBO, InTemp, LI-COR) · 610-01451
Protective cover for the LI-192 Underwater Quantum Sensor
LI-COR (HOBO, InTemp, LI-COR) · CASE-4X-2
Onset's NEMA 4X weather-resistant enclosure for mounting the HOBO UX120-014M data logger in wet, dusty, or condensing environments. It is intended for short deployments where additional protection is needed. - 4 mounting brackets and screws - 2 grommet…
LI-COR (HOBO, InTemp, LI-COR) · HOUSING-1
A protective enclosure for Onset's fully submersible HOBO MX801 data logger with one sensor attached (either CTD, Conductivity, or Dissolved Oxygen sensor). - Durable PVC construction - Predrilled for good water flow to the sensors - Includes three O-rings to…
LI-COR (HOBO, InTemp, LI-COR) · M-RSA
Preassembled for quick deployment, the solar radiation shield is recommended for temperature and relative humidity measurement accuracy in locations exposed to direct or reflected solar radiation. Mounts on tripods, masts, or flat vertical surfaces. The…
LI-COR (HOBO, InTemp, LI-COR) · RXW-UCD-868
Compatible with contact closures, such as tipping-bucket rain gauges or reed switches. A complete system requires at least one HOBO RX3000 Remote Monitoring Station, a HOBOnet Wireless Manager (RXMOD-RXW-xxx), and a HOBOnet Wireless Sensor. HOBOnet Wireless…
LI-COR (HOBO, InTemp, LI-COR) · RXW-UCC-868
Compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals. A complete system requires at least one HOBO RX3000 Remote Monitoring Station, a HOBOnet Wireless Manager (RXMOD-RXW-xxx), and a HOBOnet Wireless…
Tell EIC Controls about your application.