Brand
LI-COR (HOBO, InTemp, LI-COR)
Environmental Research · Agricultural Research · Energy · Weather
Filters
Applications
LI-COR (HOBO, InTemp, LI-COR) · OLUBE-2-00
O-ring Lube
Useful as an assembly aid for O-rings and seals, this silicone oil lubricant can be used as an assembly lubricant on all rubber polymers and makes an excellent thread lubricant and anti-seize agent. Parker’s Super O-Lube offers outstanding performance in…
LI-COR (HOBO, InTemp, LI-COR) · NIST-RH-ONEPOINT
One Point NIST RH Certification
Onset offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). This includes single-point (50% RH @ 25C) or three-point (25, 50,…
LI-COR (HOBO, InTemp, LI-COR) · BASE-U-4
Optic USB Base Station
The Universal Optic USB Base Station and couplers are used to offload data from any HOBO® data logger with an Optic USB interface. The splash-resistant Optic USB Base Station connects to your computer via USB, while connecting to the data logger via an…
LI-COR (HOBO, InTemp, LI-COR) · BASE-U-1
Optic USB Base Station for Pendant
The Pendant Base Station and Coupler provide fast optical infrared (IR) communication for easy data logger launch and readout of HOBO Pendant data loggers. The Base Station connects via USB to a host computer, while the Coupler attaches the data logger to the…
LI-COR (HOBO, InTemp, LI-COR) · 800-906
Optical Detector
Detector for LI-840/840A, LI-850, LI-870, and LI-8100/8100A
LI-COR (HOBO, InTemp, LI-COR) · 800-903
Optical Detector LI-800 and LI-820
Optical detector for the LI-800 and LI-820 CO2 Gas Analyzers
LI-COR (HOBO, InTemp, LI-COR) · 800-902
Optical Source Kit
Replacement optical source for the LI-800, LI-820, LI-830, LI-840/A and LI-850.
LI-COR (HOBO, InTemp, LI-COR) · 8100-902
Optical Source Replacement Kit
Optical source for the LI-8100/A
LI-COR (HOBO, InTemp, LI-COR) · LI-250Q
PAR Package
This complete package includes everything needed to measure photosynthetically active radiation (PAR) in a greenhouse, growth chamber, or in the field. Includes the LI-250A Light Meter, LI-190R-BNC-2 Quantum Sensor, and 2003S Mounting and Leveling Fixture.
LI-COR (HOBO, InTemp, LI-COR) · CASE-PELICAN-1510
Pelican Case
The largest, most durable airline-legal carry-on available, the new 1510 Pelican case provides safe and convenient transport of your HOBO data logging equipment. This watertight, crush-proof, and dust-proof case features a sturdy but lightweight design that…
LI-COR (HOBO, InTemp, LI-COR) · UA-PARTSKIT
Pendant® Replacement Parts Kit
Pendant replacement parts kit includes pendant case, end cap, O-ring, two screws, and silicone-based O-ring grease.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-10
pH 10.01 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-4
pH 4.01 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · MX2500-CAL-7
pH 7.00 Calibration Solution
Used to calibrate the pH electrode in the HOBO MX pH Logger.
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4103T-025
pHionics 0-1,000 µS/cm Conductivity & Temperature Sensor
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4103S-025
pHionics 0-1,000 µS/cm Conductivity & Temperature Sensor
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
LI-COR (HOBO, InTemp, LI-COR) · T-DS-STS4104S-025
pHionics 0-10,000 µS/cm Conductivity & Temperature Sensor
The pHionics STs Series™ Conductivity water quality sensor is compatible with HOBO RX stations to capture real-time conductivity and temperature data. These measurements are output via two 4-20mA signals that easily connect to HOBO stations and HOBOnet motes…
What do you need to measure?
Tell EIC Controls about your application.